OC200(UN)_V1_1.25.2 Build 20230704

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

OC200(UN)_V1_1.25.2 Build 20230704

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
OC200(UN)_V1_1.25.2 Build 20230704
OC200(UN)_V1_1.25.2 Build 20230704
2023-07-12 17:19:37 - last edited 2023-07-14 01:51:06
Model: OC200  
Hardware Version: V1
Firmware Version: OC200(UN)_V1_1.25.2 Build 20230704

Dear 

 

After upgrade the firmware in OC 200 to (OC200(UN)_V1_1.25.2 Build 20230704) all wireless clients have been viewed as wired clients and can't connect to the internet.  

File:
omada.PNGDownload
  0      
  0      
#1
Options
2 Accepted Solutions
Re:OC200(UN)_V1_1.25.2 Build 20230704-Solution
2023-07-14 01:51:03 - last edited 2023-07-14 01:51:06

Hi All,

 

Thanks for reporting this issue to the TP-Link community!


We greatly appreciate such detailed information you provided, I have forwarded this updated issue of OC200 to the engineer for further investigation. For now, please roll back your firmware version to the previous OC200 V5.9. I will keep you updated on any progress.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#7
Options
Re:OC200(UN)_V1_1.25.2 Build 20230704-Solution
2023-08-22 01:38:57 - last edited 2023-08-22 01:39:01

Hi All,

 

A newer 5.12 Beta firmware has been released for trial, please follow the post link below for details.
Omada SDN Controller_V5.12.x (Updated on Aug 21st, 2023)

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#8
Options
6 Reply
Re:OC200(UN)_V1_1.25.2 Build 20230704
2023-07-12 18:05:30
  0  
  0  
#3
Options
Re:OC200(UN)_V1_1.25.2 Build 20230704
2023-07-12 23:44:10

  @Feras-a The same thing happens to me, all my clients put them on the LAN and the voucher doesn't work. To solve the problem, I have to open the network so as not to have complaints from the clients.

  0  
  0  
#4
Options
Re:OC200(UN)_V1_1.25.2 Build 20230704
2023-07-13 10:02:32

Hello @Feras-a,

 

Thanks for reporting this issue to our community. May I confirm some information below:

 

1. What is the overall network topology of your current setup when encountering this issue?

 

2. Do you have a Portal setting?

If so, could you please provide information about your current SSID and Portal configurations?

If possible, sharing some configuration screenshots would be more helpful and intuitive.

 

3. What is the behavior of the client that is unable to the Internet at the moment?

Is the client unable to obtain an IP address? Or is it unable to connect to the SSID? 

Alternatively, does the client need to reconnect to the SSID and re-enter the Voucher Code to resolve the problem?

 

4. Could you please confirm if the problem only occurred after the upgrade period? Also, let me know if the client can automatically regain internet access without any manual intervention or actions being taken.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#5
Options
Re:OC200(UN)_V1_1.25.2 Build 20230704
2023-07-13 20:51:07

  Hello @Hank21 

 

I used the topology in the screenshot the only difference in the router I use Archer C7 for Nat.

 

the status of all clients has been only pending and the voucher system doesn't calculate the consumed.

 

this issue happened after upgrading the firmware to the last version.

 

 

 

 

  0  
  0  
#6
Options
Re:OC200(UN)_V1_1.25.2 Build 20230704-Solution
2023-07-14 01:51:03 - last edited 2023-07-14 01:51:06

Hi All,

 

Thanks for reporting this issue to the TP-Link community!


We greatly appreciate such detailed information you provided, I have forwarded this updated issue of OC200 to the engineer for further investigation. For now, please roll back your firmware version to the previous OC200 V5.9. I will keep you updated on any progress.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#7
Options
Re:OC200(UN)_V1_1.25.2 Build 20230704-Solution
2023-08-22 01:38:57 - last edited 2023-08-22 01:39:01

Hi All,

 

A newer 5.12 Beta firmware has been released for trial, please follow the post link below for details.
Omada SDN Controller_V5.12.x (Updated on Aug 21st, 2023)

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#8
Options