Beta Software ER605 V2_2.1.4_Build 20230727 Beta Firmware For Trial (Released on Aug 2nd, 2023)
This Article Applies to: ER605 v2 / v2.6_2.1.4_20230720 (Beta) | Fully adapted to Omada SDN Controller v5.11
Update as of Aug 2, 2023:
Thank you all for your valuable feedback on the ER605 2.1.4_20230720(Beta)!
Update the Beta firmware of ER605, which now includes the issue fixed that the ER605 V2 as an OpenVPN client failed to make all the Internet traffic be routed through the VPN tunnel.
ER605_V2_2.1.4_Build20230727 (Beta)
Notes:
(1) The above firmware is applied to ER605 V2 and V2.60.
(2) Your device’s configuration won’t be lost after upgrading.
(3) The above firmware is fully adapted to Omada SDN Controller 5.11.
Hello Everyone,
This release is mainly to fix some issues based on the ER605 V2 2.2.0 official firmware. Please check the following release notes for more about the fixes.
The Purpose of the Beta Firmware
We hope to offer you with a chance to experience the new features added in the Controller v5.11 in advance, and also give us TP-Link the opportunity to fully test the firmware in your real network environment and scenarios before the official release.
Release Notes
New Feature/Enhancement
1. Add ACL support for IPv6 data.
2. Add support for IPv6 RA (Router Advertisement) configuration for LAN.
3. Add support for configuring multiple IP addresses on the WAN port.
4. Add support for monitoring session limits in controller mode.
5. Add support for configuring the MSS (Maximum Segment Size) of WAN port.
6. Add support for Gateway Tools in Controller mode:
- Ping.
- Traceroute.
- Terminal.
7. Add support for the ability to download device info of Gateway in Controller mode.
8. Add support for Location Group in Gateway ACL.
9. Add support for white list of MAC filtering in Controller mode.
10. Add support for tagging same VLAN ID on different WAN port.
11. Increased security of communication between Gateway and Controller.
12. Add support for DNS cache, which can improve domain name resolution speed by handling recent address resolutions locally before sending request to Internet
13. Add support for DH 14 and DH 15 for PFS.
14. Add support for 0.0.0.0/0 IP range of local network when using IPsec IKEv2 for Client-to-Site VPN.
15. Add support for DDNS custom intervals (1~60 minutes).
16. Add support for link-local addresses or unique local addresses of IPv6 DNS on the LAN side.
17. Log Enhancements.
- Show the source IP address of TCP no-Flag /ping of death attacks.
- Show the log of link backup switching.
- Show the log of DDNS update.
- Logs can be saved when the device is down. You need to short press the reset button within 5s, and after releasing the reset button, the sys light will be on for 3 seconds to indicate that the downtime log is saved successfully.
Bug Fixed
1. Fix the bug that ICMP type 13 packets cannot be intercepted.
2. Fix the bug that VPN Client cannot access the other side through IPsec when the device act as a PPTP/L2TP/OpenVPN Server and also establishes IPsec VPN with other devices.
3. Fix the bug that VPN client cannot proxy Internet access when VPN IP Pool and LAN IP are in the same network segment.
4. Fix the bug of CPU abnormality caused by enabling more VLAN Interface.
5. Fix the bug of high latency in ISP Load in Controller mode.
6. Fix the bug of frequent reconnection with Omada Controller.
7. Fix the bug that the VLAN configuration of IPTV is affected by the VLAN configuration of WAN port in Controller mode.
8. Fix the bug that the device does not support proxy internet access as Wireguard VPN client.
9. Fix the bug that Port Forwarding does not take effect under multiple WAN ports.
10. Fixed the issue that the Router might become “DISCONNECTED” in the controller after upgrading to firmware 2.2.0. Reported Here.
11. Fixed the issue that new clients might lose Internet when bandwidth control is configured.
12. Fixed the issue that OpenVPN Server no longer works after upgrading to firmware 2.2.0. Reported Here.
13. Fixed the issue that Internet/DNS resolving might not work when using OpenVPN Connect App/Software to connect to the Router’s OpenVPN Server.
14. Fixed the issue that the ER605 V2 as an OpenVPN client failed to make all the Internet traffic be routed through the VPN tunnel.
Beta Firmware Download
Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!
ER605_v2_2.1.4_Build 20230720 (Beta)
Notes:
(1) The above firmware is applied to ER605 V2 and V2.60.
(2) Your device’s configuration won’t be lost after upgrading.
(3) The above firmware is fully adapted to Omada SDN Controller 5.11.
Update as of Aug 2, 2023:
Update the Beta firmware of ER605, which now includes the issue fixed that the ER605 V2 as an OpenVPN client failed to make all the Internet traffic be routed through the VPN tunnel.
ER605_V2_2.1.4_Build20230727 (Beta)
Notes:
(1) The above firmware is applied to ER605 V2 and V2.60.
(2) Your device’s configuration won’t be lost after upgrading.
(3) The above firmware is fully adapted to Omada SDN Controller 5.11.
Feedback
Any further feedback on the new firmware, please feel free to comment below or start a new thread from HERE.
To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.
When reporting an issue, especially it's about firmware upgrade, it's suggested to include the following info:
- Management mode (Controller or Standalone)
- Device Model(s) and Hardware
- Device Firmware (previous and current)
Thank you in advance for your great cooperation and support.
Recommended Threads
Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates
Current Available Solutions to Omada Router Related Issues [Actively Updated, Post for Subscription]
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@ceejaybassist I had the 2.2 firmware and it worked fine but I also have found this 2.1.4 to be buggy as!
it just randomly reboots if you change a setting sometkmes.
i changed I think a bandwidth control limit and boom internet down 5 minutes later! So slow to boot this ER605!
And again that QoS nonsense needs to be able to set a minimum reservation none of this “must be devided out evenly and limits everything nonsense”.
I would like that 2.2 firmware back I had no stability issues wth that atleast. And where is the OC 5.11 stuff?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Hank21 I didn't face any DHCP issues in this build.
The latency seems to be high.
Sometimes, website would take forever to load with IPv6. So, I had to disable IPv6.
Online detection sometimes randomly sets WAN as offline even though under network > WAN is showing as connected. So I had to press disconnect and connect to manually switch back to WAN from WAN 1.
Bandwidth control has issues with long boot time. I had to put it recovery mode and reset everything to resolve slow boot time (I didn't touch bandwidth control after that).
Will SQM (cake or codel) be implemented anytime soon?
P. S: I'm using this build in standalone mode without any VPN
- Copy Link
- Report Inappropriate Content
Hi @MrHC1983
Thanks for posting in our business forum.
Can you replicate all of the issues you described? What's your controller version?
- Copy Link
- Report Inappropriate Content
Can I ask how long as the OC200 and ER605 been out now? Because I feel like this stuff is less then a year old in terms of the hardware/software....... It's so damn buggy, missing stuff....... like is this a garage job.....
I'm confused. I wish I'd gone Ubiquity now.... but maybe not probably not much better if at all.
The OC200 should work in tandum with the rest........ the software versions are all mismatched, the features ........ like ER605 2.14 does bandwidth control work now?.... I feel like thats not working.
DHCP Static not providing custom DNS if I wanted that, QoS is just a joke..... it's a full lock of speed not a min request etc.
UPDATE: I ended up rolling my firmware back to 2.1.3 as the 2.1.4 kept randomly rebooting....
- Copy Link
- Report Inappropriate Content
Hi @MrHC1983
Thanks for posting in our business forum.
I don't have any information about the firmware release or can guarantee any release date. This depends on the dev team.
I have not received much feedback on this beta about the random reboot. I'll keep an eye on this issue as well.
If you are interested, you can let me know your controller version and more details about the random reboot.
- Copy Link
- Report Inappropriate Content
Thanks for posting in our business forum.
Can you describe more about the "freeze" and "reboot" thing in your reply?
How do you determine it freezes? It reboots, is your Internet access affected? Do you monitor its light status and find out this reboot by the light changes?
Would appreciate it if you can give more details about this.
- Copy Link
- Report Inappropriate Content
@Clive_A The sys led suddenly stops blinking (stays on), the internet also stops working, then after 5 secs, it reboots. I know it rebooted coz only the power led is on.
- Copy Link
- Report Inappropriate Content
Thanks for mentioning more details.
Can you provide the current firmware of your controller? Please keep your ER605 on V2.1.4 beta and I'll help you escalate this case.
Moreover, how often does it happen? Is it purely random, with no pattern at all?
Please prepare and export your running log and backup file for further diagnosis from our senior engineers.
- Copy Link
- Report Inappropriate Content
Thank you so much for taking the time to post the issue on TP-Link community!
To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID is TKID230753288, please check your email box and ensure the support email is well received. Thanks!
Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.
Many thanks for your great cooperation and patience!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 3
Views: 32647
Replies: 134