Using router ER7206 and not finding my NAS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Using router ER7206 and not finding my NAS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Using router ER7206 and not finding my NAS
Using router ER7206 and not finding my NAS
2023-09-03 21:39:24 - last edited 2023-09-04 07:46:17
Model: ER7206 (TL-ER7206)  
Hardware Version: V1
Firmware Version: 1.3.0 Build 20230322 Rel.70951

I recently acquired the ER7206 router, and i managed to set it up today. my Network setup is simple 1 wan (vdsl), 1 router (er7206) and an old Asus RT-AC56U (soon to be my access point) and 1 synology NAS

The old Asus router was my main router setup with the ip 192.168.25.1/24 and my NAS has a static IP of 192.168.25.13.
[EDIT] - I've used the omada controller Software.
I've created 3 LANs (each with their respectives VLAN ID) and assigned to one specific port. One of these LANs has the 192.168.25.1/24 as shown below:


 

The Nas is connected to the right port (LAN2) and has an ACL setup that permits a bi-directionnal trafics from my main lan 192.168.30.1/24 (LAN3 port).

My issue is that i cannot see the NAS in my client list nor ping the NAS static IP. Any suggestion or thoughts of what I should do?

 

Thank you for your time.

  0      
  0      
#1
Options
3 Reply
Re:Using router ER7206 and not finding my NAS
2023-09-04 07:35:43

Hi @Setlec 

Thanks for posting in our business forum.

If you cannot even ping it, then it's your scheme that blocks it from being accessible.

I suggest you start troubleshooting from your ACL.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ (Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)
  0  
  0  
#2
Options
Re:Using router ER7206 and not finding my NAS
2023-09-06 18:32:12
I did the following I changed my main network to the IP range that i used and deleted the lan and its VLAN ID, then my NAS became reachable. I, also, deleted my ACL rules.
  0  
  0  
#3
Options
Re:Using router ER7206 and not finding my NAS
2023-09-07 21:15:47

Round 2: my VLAN do work i can ping and all. How do i setup the DNS so that every device (NAS, Computers, phones and so on) do show in the windows network discovery?

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 403

Replies: 3

Related Articles