Upgrade firmware to a new switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Upgrade firmware to a new switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Upgrade firmware to a new switch
Upgrade firmware to a new switch
2023-09-09 17:53:15 - last edited 2023-09-11 02:56:33
Model: TL-SG3428  
Hardware Version: V1
Firmware Version: 1.0.0 Build 20200729 Rel.73648

Hi

Looking for the firmware upgrade in the TP-LINK support page for hardware version 1.6 (labeled in the switch), I found it in the TP-LINK support page. The oldest firmware version to start the upgrades is TL-SG3428(UN)_V1.6_20210407.

 

The actual firmware of the switch (out of the box) is:

1.0.0 Build 20200729 Rel.73648

Hardware Version: TL-SG3428 1.0


These are my questions:

1. The hardware version of the label (1.6) is not equal to the hardware version shown by the graphic interface of the switch (1.0). Could I trust that they are the same and proceed?


2. As I can see in the upgrade page, these are all the upgrades required to bring the firmware up to date. Should I run all if the answer to question 1 is yes?

    V1.6_20210407

    V1.6_1.1.1 Build 202105141.0.

    V1.6_20210806

    V1.6_1.1.7 Build 20221130

    

I appreciate your help.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Upgrade firmware to a new switch-Solution
2023-09-11 02:55:20 - last edited 2023-09-11 02:56:33

Hi @Joe2022 

Thanks for posting in our business forum.

1. Same. V1.6 is the same as V1.0. Different factories with the same hardware pieces. If it's other version, then you should refer to the support page where it explains the different versions.

2. Latest one should be this:

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Upgrade firmware to a new switch-Solution
2023-09-11 02:55:20 - last edited 2023-09-11 02:56:33

Hi @Joe2022 

Thanks for posting in our business forum.

1. Same. V1.6 is the same as V1.0. Different factories with the same hardware pieces. If it's other version, then you should refer to the support page where it explains the different versions.

2. Latest one should be this:

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#2
Options