ER707-M2 -> Internet Wan Off-line. (HW-upgrade from ER605-V2 to ER707-M2)
Can not get the Internet / Wan connection up and running with the ER707-M2 after HW upgrade from ER605-V2
I use an OC300 ( Latest Firmware)
1) ER605V2 -> Function ok.
2) ER605V2 -> Forget device
3) ER707M2 -> install and Power on
4) Wired Network -> changed gateway model to ER707-M2 , configure the WAN
5) Adopt ER707-M2 (Signal led for the RJ45 lines ok)
6) ER707-M2 Connected but WAN Off Line -> even after manual start stays off line.
Same problem for WAN1 /WAN2 / WAN3
7) High Rate of errors logged -> all related to ISP-connection that is not available IP / DNS ...
Function not ok and go back to original HW-configuration with ER605-V2
8) ER707-M2 Forget Device.
9) Wired Network -> changed gateway model to ER605-V2 , configure the WAN
10) Adopt ER605-V2 (Signal led for the RJ45 lines ok)
11) Everything ok. No problem, function as defined before.
12) ER605V2 up an running
Any feedback is welcome
Benny.