EAP245 V4 no vlan on eth1? -> Answered, no untagged eth1 possible (yet)!

EAP245 V4 no vlan on eth1? -> Answered, no untagged eth1 possible (yet)!

EAP245 V4 no vlan on eth1? -> Answered, no untagged eth1 possible (yet)!
EAP245 V4 no vlan on eth1? -> Answered, no untagged eth1 possible (yet)!
2024-02-23 03:43:32 - last edited 2024-02-27 11:24:04
Model: EAP245  
Hardware Version: V4
Firmware Version: 1.2.1

Hi,

i´m just in a new installation and got eap245 v3 (4x) and v4 (15x). I decided for the 245m because i need a wall-outlet below the ap on a specific vlan. Now i can´t find the eth-settings in the v4 ap.

In the v3 it´s located under "advanced", but in v4 there is only poe-out. 

 

 

How can i configure the VLAN on the v4 of the ap´s?

 

Thanks!

Matze

 

Update: I´m already in touch with the support. It looks like that is a functional downgrade - for my use-case.

Support gave me an update - the v3 has a different chipset than v4 - and with this chipset it is (currently) impossible to set the port tagged. So, if you need a tagged port you must get a v3 instead of v4. If you can handle untagged networks the v4 can be used.

  0      
  0      
#1
Options
2 Reply
Re:EAP245 V4 no vlan on eth1?
2024-02-26 02:42:39

  @Matze78 

 

What will you see if enable it? A vlan id can be set there?

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:EAP245 V4 no vlan on eth1?
2024-02-26 05:45:51

  @Virgo correct, when you enable it on the V3 you can set the port-vlan-id.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 139

Replies: 2