How to give IP from Wan to my LAN devices

How to give IP from Wan to my LAN devices

How to give IP from Wan to my LAN devices
How to give IP from Wan to my LAN devices
2024-03-23 04:04:45 - last edited 2024-03-25 01:09:55
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version:

Hello.

I set up a TP-Link ER605 Omada VPN Router.

My Old infrastructure has Static IP from WAN 192.168.10.10 from ISP router and all my devices and servers has static IP from ISP router.

My TP-Link ER605 has LAN IP  192.168.0.1 and also end users take this IP.

How to get  this IP 192.168.10.10 from WAN to give to my LAN because I can't change this range of IP to end devices because of some specific softwares.

Is there any chance please help me.

Thank 

  0      
  0      
#1
Options
1 Accepted Solution
Re:How to give IP from Wan to my LAN devices-Solution
2024-03-23 11:03:25 - last edited 2024-03-25 01:09:55

  @Allianztech 

 

you cannot have the same ip network on WAN and LAN, but this should be easy to solve, change the ip on the ISP router to something else, then set the ip on the ER605 to what was on the ISP router before.

 

 

Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:How to give IP from Wan to my LAN devices-Solution
2024-03-23 11:03:25 - last edited 2024-03-25 01:09:55

  @Allianztech 

 

you cannot have the same ip network on WAN and LAN, but this should be easy to solve, change the ip on the ISP router to something else, then set the ip on the ER605 to what was on the ISP router before.

 

 

Recommended Solution
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 240

Replies: 1

Related Articles