Home Network Community > Deco > Unable to connect to internet with last frimware
< Deco

Unable to connect to internet with last frimware

Unable to connect to internet with last frimware

Unable to connect to internet with last frimware
Unable to connect to internet with last frimware
2024-05-21 14:36:03
Tags: #Firmware Update #Reports
Model: Deco X50-5G  
Hardware Version: V1
Firmware Version: 1.1.3 Build 20240109 Rel. 73423

Hi

i have TP-LINK Deco X50 5G

I'm from Iran i couldn't connect to internet when I upgrade to last version of this deco 1.1.3 build20240109.

i need help to downgrade  to firmware Deco X50-5G(EU)_V1_1.0.0 Build 20221226

its only firmware its work in my country.

  2      
 
  2      
 
#1
Options
8 Reply
Re:Unable to connect to internet with last frimware
2024-05-22 06:25:29

  @abbasi83 

Hi, I think you could try to install the latest 1.1.5 firmware here to see whether it helped:

Deco X50-5G 1.1.5 with Bridge Mode and Cell Lock

Wait for your reply and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Unable to connect to internet with last frimware
2024-05-22 08:57:50

  @David-TP 

 It still doesn't work Because it is the only firmware version that works its firmware Deco X50-5G(EU)_V1_1.0.0 Build 20221226

i need help to downgrade it

 

  0  
  0  
#3
Options
Re:Unable to connect to internet with last frimware
2024-05-23 10:08:20

  @abbasi83 

Hi, sorry for the delay.

the firmware downgrade from 1.1.5/1.1.3 to 1.0.0 might need to be implemented via firmware recovery:

How to use firmware recovery on Deco- HTTP Uboot Method

1.0.2 firmware download link:(I couldn't find 1.0.0 and 1.0.2 is the only version I could find now, sorry!)

https://static.tp-link.com/upload/firmware/2023/202306/20230604/Deco_X50-5G_1.0_1.0.2 Build 20230411.zip

 

Thank you very much and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0  
  0  
#4
Options
Re:Unable to connect to internet with last frimware
2024-05-23 16:50:32

  @David-TP 

Now it is completely broken and does not connect at all and the yellow light is constantly flashing

what's must be doing ? 

  0  
  0  
#5
Options
Re:Unable to connect to internet with last frimware
2024-05-24 00:57:36

  @abbasi83 

Hi, Did the flashing yellow LED start after you long-hold the reset pinhole to get into recovery mode? or after uploading the 1.0.2 bin file?

If we power it off for a few minutes, then power it back, will it become solid yellow---> solid red--->flashing blue in the end?

 

If it is constantly flashing yellow without any change, please try to hold the reset pinhole for only 1 second this time, then check whether there would be any change to the LED status

Wait for your reply and best regards.

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0  
  0  
#6
Options
Re:Unable to connect to internet with last frimware
2024-05-24 13:04:07

  @David-TP 

Hello, yes, after uploading the 1.0.2 version, it showed a success message, after turning off the modem, it kept showing a yellow light, and when I hold the reset button, the color turns blue, but it doesn't come out of this mode. other.
I even downloaded newer versions like 1.1.5 and uploaded them, but it still didn't work and it keeps showing the yellow light.

  0  
  0  
#7
Options
Re:Unable to connect to internet with last frimware
2024-05-27 10:26:38

  @abbasi83 

Hi,

Here is the LED Status explanation on the Deco X50-5G:

If the LED is flashing blue now, Deco X50-5G is ready for re-configuration. 

Usually after a power restart or firmware recovery, it might take about 1 minute for Deco to turn from yellow to flashing blue.

The good news is that I managed to find the 1.0.0 version of Deco X50-5G(EU).

https://static.tp-link.com/upload/firmware/2023/202303/20230308/Deco_X50-5G_1.0_1.0.0_20221226.zip

 

Wait for your good news and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0  
  0  
#8
Options
Re:Unable to connect to internet with last frimware
a week ago

Tags: #Firmware Update #Reports

Model: Deco X50-5G  

Hardware Version: V1

Firmware Version: 1.1.3 Build 20240109 Rel. 73423

 

 

Hey Everyone, I have the same issue, I searched in the Internet, It's seems that old framewares work for us in Iran but new framework don't work.

I wanted to Downgrade my Deco but it seems there is some issue. The frameware is about 150 MB but As I read the tools that is used for downgrade has 32MB limitaion.

 

Can I ask you to help me how downgrade it and how can I find All framewares before `Firmware Version: 1.1.3 Build 20240109 Rel. 73423`

 

I Also inforemd Middle East TP-Link support about this issue.

  0  
  0  
#9
Options

Information

Helpful: 2

Views: 559

Replies: 8

Tags

Firmware Update Reports
Related Articles
 Unable to connect to internet with last frimware
432 0
Unable to connect to the internet
845 0
Unable to Connect Internet
743 0
Unable to connect to internet
1033 0
 Only first light and last lights are on, unable to connect
666 0
 Unable to connect to internet
658 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.