How to set port-specific firewall rules?

How to set port-specific firewall rules?

How to set port-specific firewall rules?
How to set port-specific firewall rules?
2024-08-18 10:06:27 - last edited 2024-08-19 02:08:48
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.5

Hi,

How we do specify port-based firewall rules?

- allow incoming connections on port 7000 from India, block all other countries.

- allow incoming connections on port 8000 from all countries

 

I'm on standalone mode and not using a controller.

 

I have a public/static IP with port-forwarding service enabled.

 

Thanks!

 

  0      
  0      
#1
Options
2 Accepted Solutions
Re:How to set port-specific firewall rules?-Solution
2024-08-18 10:35:32 - last edited 2024-08-19 02:09:19

  @PiyushBQ 

 

you must first create a location group, then acl (access control)

 

i'm not sure if you can use ip port group in stand alone but in controller mode you can, you almost have to try to see

 

 

 

Recommended Solution
  1  
  1  
#2
Options
Re:How to set port-specific firewall rules?-Solution
2024-08-19 02:07:36 - last edited 2024-08-19 02:08:48

Hi @PiyushBQ 

Thanks for posting in our business forum.

Set up the ACL. Service should be manually created to adjust your needs.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#3
Options
2 Reply
Re:How to set port-specific firewall rules?-Solution
2024-08-18 10:35:32 - last edited 2024-08-19 02:09:19

  @PiyushBQ 

 

you must first create a location group, then acl (access control)

 

i'm not sure if you can use ip port group in stand alone but in controller mode you can, you almost have to try to see

 

 

 

Recommended Solution
  1  
  1  
#2
Options
Re:How to set port-specific firewall rules?-Solution
2024-08-19 02:07:36 - last edited 2024-08-19 02:08:48

Hi @PiyushBQ 

Thanks for posting in our business forum.

Set up the ACL. Service should be manually created to adjust your needs.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#3
Options

Information

Helpful: 0

Views: 191

Replies: 2

Related Articles