Tether app displaying OneMesh as opposed to EasyMesh
Hi Folks,
I have an Archer AX73 v2.0 (Firmware Version: 1.1.0 Build 20240323 rel.70541(4555) ) connected to a TL-WPA8631P Powerline Adapter (Hardware and Firmware versions attached to thread.) in a mesh network. Everything works fine, but in my Tether app (Version 4.7.14 - latest version I believe) the menu item is displayed as OneMesh, when I think it should be displayed as EasyMesh. Before I had my Archer AX73, I had a Archer AX72 Pro connected to the same powerline adapter and I believe the app displayed EasyMesh, and this meant that from the main Network page, I could see the adapter in the same network as the router, tap on it, and see the clients that were connected to it. I could also see the adapter listed as a Satelite Device on the My Devices page. This is not the case with my AX73, the adapter only appears under the OneMesh tab, and I have to go into advanced settings to see which clients are connected to it. If possible, I would like to set the app up where I can see the adapter from the main network page - it's not a deal breaker or anything but it would be nice. I have checked the EasyMesh supported device pages and both of my devices are listed as supported. I would also like to point out that the menu items are displayed as EasyMesh on the web browser pages that manage the router and adapter via their IP addresses.
Any help to get this fixed would be greatly appreciated, if anymore details or clarification is needed, please just reach out.
Dear @MrJi
Thank you very much for the information, it was important for me to know that the Archer AX80 does not have a smaller range than the Archer AX73, and especially that both routers have no problem working in EasyMesh mode.
As for switching to Wi-Fi 7 and the BE standard, I was also thinking about it, but I currently do not own a device that supports Wi-Fi 7, so I am not being given money for something that I cannot fully use yet! 
So only when I first get new devices/clients that support Wi-Fi 7 and decide to switch from Wi-Fi 6, I think that by then the prices of devices with Wi-Fi 7 will also get a little cheaper because for now all of that is still expensive for me!. 
Thanks!
By any chance will a firmware fix or tether app fix for this issue be coming out soon?
I've been stuck with this bug for over a year and up until now it seems the latest firmware for both AX80 and AX73 still doesn't fix this issue.
My EasyMesh main router is AX80 and my satellite router is AX73.
OneMesh is displaying instead of EasyMesh on the Tether App.
@Sunshine
I'm also curious when your technical support will resolve this issue in the Tether application, because I was planning to buy an Archer AX80 these days, so should I hope that the issue will be resolved?
I definitely keep OneMesh turned off in the Tether application, but it irritates me because I don't have the EasyMesh function displayed in Tether, and by the way, these screenshots are from my Archer AX73, so it doesn't work on it as well as on the Archer AX80...
Please fix it !
