Home Network Community > Deco > Deco M4 not getting WAN ip address immediately after reboot
< Deco

Deco M4 not getting WAN ip address immediately after reboot

Deco M4 not getting WAN ip address immediately after reboot

Deco M4 not getting WAN ip address immediately after reboot
Deco M4 not getting WAN ip address immediately after reboot
2024-09-14 00:44:31 - last edited 2024-09-14 01:18:18
Tags: #Network Connectivity #VLAN/IPTV
Model: Deco M4  
Hardware Version: V2
Firmware Version: 1.7.0 Beta Firmware

Hey !!

I have install again beta firmware to check IPTV bridge but still speed fluctuations problem but in beta firmware there is another problem is that i can't get WAN ip address immediately after reboot and when i get WAN ip address after few minutes but no internet connection until port (53) DNS port came back online. I tried manual MAC address, Manual WAN ports settings, Manual MTU settings and tried to change DNS servers but nothing can work. Please do something. @David-TP @Sunshine @TP-Link @Kevin_Z 

 

  0      
 
  0      
 
#1
Options
3 Reply
Re:Deco M4 not getting WAN ip address immediately after reboot
2024-09-14 05:55:07

  @ARGamingPK1 

Hi, Thanks for the feedback. You've raised this concern several times, and it also has been escalated to our senior engineers for additional support

We'd love to offer help in the community. However, the basic troubleshooting steps didn't help and more specialized assistance is needed.

 

I still wish you could reach out to the engineer directly via email to negotiate a proper solution, whether a new beta firmware or something else.

Thank you very much and best regards.

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  1  
  1  
#2
Options
Re:Deco M4 not getting WAN ip address immediately after reboot
2024-09-21 00:04:36 - last edited 2024-09-21 00:27:59

  @David-TP After the reboot i'm not able to access Web UI immediately (192.168.68.1) and not able to access ONT (192.168.100.1) because can't get the WAN ip address immediately. I'm facing this problem after the beta firmware (1.7.0) before that everything works fine.

 

  0  
  0  
#4
Options
Re:Deco M4 not getting WAN ip address immediately after reboot
3 недель назад

  @David-TP Still im facing this issue on this beta firmware i have tried all my Deco units as a Main and same issue

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 247

Replies: 3

Tags

Network Connectivity VLAN/IPTV
Related Articles
 Deco M4 not getting WAN ip address
403 2
What is DECO M4 LAN/WAN MAC address ?
2327 0
Deco M4 WAN Port Mac Address
4548 0
Printer has wrong ip address on Deco M4 network
926 0
Fixed IP address for the second Deco M4 device
5908 0
 Deco M4 Web UI not working immediately after reboot
137 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.