Business Community > Controllers > MAC-Filtering with Omada Controller connected to switch
< Controllers

MAC-Filtering with Omada Controller connected to switch

MAC-Filtering with Omada Controller connected to switch

MAC-Filtering with Omada Controller connected to switch
MAC-Filtering with Omada Controller connected to switch
2024-09-16 07:54:56
Tags: #Controller Installation #Adoption

Hi all togehter,

 

i have a Problem to which i cannot find any answers.

 

I set Up my Router (ER605) and my Switch (SG2008P). Controller is connected to the Router. MAC-Filtering ist activated. Everything works fine.

 

When i now connect the Controller to the Switch (because i want to use PoE), it cannot adopt the Router anymore although the MAC Adress of the Router is Set in the UI.

 

When i do all the Things again without MAC Filtering active, everything works perfectly fine.

 

What am i doing wrong?

 

Thank you very much!

  0      
 
  0      
 
#1
Options
3 Reply
Re:MAC-Filtering with Omada Controller connected to switch
2024-09-17 03:30:12

Hi  @omada_noob 

 

We need to know what the MAC filtering configuration is.

You may delete the MAC filtering config first and then change the topology. After adopting the router successfully, please check the MAC filtering settings carefully. 

  0  
  0  
#2
Options
Re:MAC-Filtering with Omada Controller connected to switch
2024-09-24 17:50:46

Hi  @Vincent-TP,

 

ok i will try it again.

Is it theoretically possible to connect the Controller to the switch and not directly to the Router? And i don't need an extra configuration for this setup, right?

  0  
  0  
#3
Options
Re:MAC-Filtering with Omada Controller connected to switch
2024-09-25 01:07:50

Hi @omada_noob 

Thanks for posting in our business forum.

omada_noob wrote

Hi  @Vincent-TP,

 

ok i will try it again.

Is it theoretically possible to connect the Controller to the switch and not directly to the Router? And i don't need an extra configuration for this setup, right?

Of course. There would not be a problem with that setup.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#4
Options

Information

Helpful: 0

Views: 231

Replies: 3

Tags

Controller Installation Adoption
Related Articles
MAC FILTERING
3001 0
MAC Filtering problem
507 0
 MAC FIltering
377 0
 MAC Filtering
753 0
 MAC address filtering not filtering
971 0
Inquiry Regarding MAC Address Filtering
330 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.