Problem EAP 225 Indoor / EAP 110 Indoor - Wifi network Lost
Hello,
I have two sites, and I migrate the site 2 from
MR600
EAP 225 outdoor
Netgear 24 ports POE
to
EAP 225 outdoor v3.0
EAP 225 indoor v3.0
EAP 110 indoor v4.0
ER605 v2.0
TL-SG2428P v4.0
OC200 v5
With the MR600 no problem, with he full TP Link config the EAP 225 indoor is disconnected, from OC200 few times a day and wifi network disappear and I need to connect and reconnect the power via POE to get it back
What I have tested:
- Reset of EAP 225 indoor -- problem stay
- Set only one wifi network on the EAP 225 outdoor and the three others one to the EAP 225 indoor -- situation is the same
- Use the wireless optimization configuration -- problem stay
- Replace power via PoE by a external injector for the EAP 225 indoor -- problem stay
- Get EAP 110 indoor and EAP 225 connected at the same time and in the same room -- problem stay
- Replace the EAP 225 by a EAP 110 -- situation is worse and the wifi network is lost every 10 minutes and come back few minutes after
I don't know what to do....
Could you help?
Thanks,
Site 1
- No problem
- Connected to the OC200 by internet method via ports open following the TP-Link KB
- APs and internet router (from my ISP) are connected to a switch TL-SG1008PE
- All EAPs have been updated with the last firmware
Site
Config on all EAP (same for 2.4GHz and 5GHz)
Site Wifi configuration
Site 2
- Problem
- All EAPs have been updated with the last firmware
Site
Config on all EAP (same for 2.4GHz and 5GHz)
Site Wifi configuration
Site Wireless configuration
EAP 225 Indoor Stat -- EAP creating the trouble