How to route a network/vlan traffic to a selected wan

How to route a network/vlan traffic to a selected wan

How to route a network/vlan traffic to a selected wan
How to route a network/vlan traffic to a selected wan
2025-05-22 23:25:17 - last edited 2025-05-23 01:22:14
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.6

Hi, I am wanting to make all internet traffic on a network/vlan use the secondary wan port only.

 

this is to separate the internet usage based on who or what devices.

 

So default would use wan port for internet & guest/privet network would use wan 2.

  0      
  0      
#1
Options
1 Accepted Solution
Re:How to route a network/vlan traffic to a selected wan-Solution
2025-05-23 01:20:24 - last edited 2025-05-23 01:22:01

  @Techmars 

You can configure the PBR to allow the traffic on a specific WAN.

Policy Routing.

 

How to Set Up Policy Routing

Recommended Solution
  1  
  1  
#2
Options
2 Reply
Re:How to route a network/vlan traffic to a selected wan-Solution
2025-05-23 01:20:24 - last edited 2025-05-23 01:22:01

  @Techmars 

You can configure the PBR to allow the traffic on a specific WAN.

Policy Routing.

 

How to Set Up Policy Routing

Recommended Solution
  1  
  1  
#2
Options
Re:How to route a network/vlan traffic to a selected wan
2025-05-23 10:51:42

  @Techmars 

 

As @Clive_A suggested i handle this settings ~ routing ~ policy routing:

 

 

Basically with this setup my ipcam, iot devices and guest wifi is using my secondary wan connection while the other devices (vlans) in my company network uses the first wan connection.

  0  
  0  
#3
Options