Vacuum schedule not working

Vacuum schedule not working

Vacuum schedule not working
Vacuum schedule not working
2025-07-18 07:59:01 - last edited 2025-07-21 08:08:50
Model: Tapo RV20 Max Plus  
Hardware Version:
Firmware Version:

Hello, 

I've set a scheduled to clean the whole house at a specific time. The schedule seems to be set properly and is active but nothing has happened. Any idea what could be wrong? 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Vacuum schedule not working -Solution
2025-07-21 08:08:28 - last edited 2025-07-21 08:08:50
Hi Wayne, Thank you for your reply. I have found the issue. There was a "Do not disturb" set up to 8am and I had the schedule to start at 6:30am. I don't remember setting this do not disturb but that was an easy fix.
Recommended Solution
  1  
  1  
#3
Options
3 Reply
Re:Vacuum schedule not working
2025-07-21 06:39:36

  @Joel-G 

 

Is the vacuum connected to the internet? The robot vacuum needs to connect to the internet to sync and calibrate its time. It must connect to a Wi-Fi network with internet access at least during the initial setup to ensure correct time synchronization. If it always operates in the local network without internet access, the device's time may gradually become inaccurate. Additionally, device's time will be lost after a restart, if the robot vacuum cannot access internet after rebooting, then its device's time becomes inaccurate, which means the schedule feature won't run.

 

Check whether the effective time -- repeat days (day within a week) is set correctly. Try to restart both the robot vacuum and the router, see if this helps.

 

Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual ModesTapo Camera Image Style & Image Brightness Try out a different image style for your camera!
  0  
  0  
#2
Options
Re:Vacuum schedule not working -Solution
2025-07-21 08:08:28 - last edited 2025-07-21 08:08:50
Hi Wayne, Thank you for your reply. I have found the issue. There was a "Do not disturb" set up to 8am and I had the schedule to start at 6:30am. I don't remember setting this do not disturb but that was an easy fix.
Recommended Solution
  1  
  1  
#3
Options
Re:Vacuum schedule not working
2025-07-21 09:56:41

  @Joel-G 

 

Thank you for the update!

Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual ModesTapo Camera Image Style & Image Brightness Try out a different image style for your camera!
  0  
  0  
#4
Options