Home Network Community > Deco > Deco X50 5G new Firmware version 1.3.0
< Deco

Deco X50 5G new Firmware version 1.3.0

Deco X50 5G new Firmware version 1.3.0

Deco X50 5G new Firmware version 1.3.0
Deco X50 5G new Firmware version 1.3.0
2025-08-15 05:58:24 - last edited 2025-08-26 07:52:21
Tags: #Firmware Update #Deco App Related
Model: Deco X50-5G   Deco X50  
Hardware Version: V1
Firmware Version: 1.3.0

Hi,

 

yesterday I received the new firmware version 1.3.0 for the Deco X50 5G.

I installed it and in general it runs as good as the 1.2.1 for now.

 

As I have happily recognized the individual configuration of the LED status was implemented again.

I tried to activate but exactly this failed.

 

There's an issue with the listing of the available devices/satellite decos.

I have three additional satellites X50 in my system, all up to date with the 1.6.7 firmware version.

The network overview shows the configuration correctly with all satellites, the list for LED status configuration does not. There's always missing one satellite in the list. Only the main Deco plus two satellites (instead of three) are shown.

I verified this as I deleted one satellite from the system. The list then shows the main Deco plus one additional satellite (instead of two) are listed.

 

     

 

     

 

Please start trouble shooting and provide an update.

 

BR

David

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:Deco X50 5G new Firmware version 1.3.0-Solution
2025-08-25 14:52:06 - last edited 2025-08-26 07:52:21

  @David-TP 

 

Hi,

 

I received a new Beta with a bug fix from support team. 
After installation of this Beta now the individual configuration of the LED status works fine. 
 

Currently I can't detect any malfunctions for this firmware. 
 

 

BR

David 

Recommended Solution
  1  
  1  
#5
Options
4 Reply
Re:Deco X50 5G new Firmware version 1.3.0
2025-08-18 02:16:34 - last edited 2025-08-18 02:20:58

  @David_Alex 

Hi, thank you very much for the feedback.

Could you please refer to this link to help me submit the Deco APP log:

How to submit Deco APP log

 

As for the individual LED control, would there be any error message when you failed to set it separately?

(If yes, can I have a screenshot?)

 

By the way, did all three satellite Deco X50s join the Mesh network via WiFi Backhaul？

Wait for your reply.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Deco X50 5G new Firmware version 1.3.0
2025-08-18 04:49:04

  @David-TP 

 

Hi!

 

Log file already sent to you as described in your link. 
 

It's not possible to select any individual LED configuration for any Deco unit. 
 

All three satellite units joined the mesh via WiFi backhaul. 

  1  
  1  
#3
Options
Re:Deco X50 5G new Firmware version 1.3.0
2025-08-18 07:03:53

  @David_Alex 

Thank you very much. The log has been received and forwarded to the senior engineer for further assistance.

Please check the email later for more suggestions.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#4
Options
Re:Deco X50 5G new Firmware version 1.3.0-Solution
2025-08-25 14:52:06 - last edited 2025-08-26 07:52:21

  @David-TP 

 

Hi,

 

I received a new Beta with a bug fix from support team. 
After installation of this Beta now the individual configuration of the LED status works fine. 
 

Currently I can't detect any malfunctions for this firmware. 
 

 

BR

David 

Recommended Solution
  1  
  1  
#5
Options

Information

Helpful: 1

Views: 369

Replies: 4

Tags

Firmware Update Deco App Related
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.