Can I trigger a preset of C540S from an Insight series camera based on Human Detection
Hello,
I have a Vigi C540S and Insight 355 Camera connected to VIGI 1016H NVR.
I want to trigger a preset of C540S if my Insight 355 camera detects a human.
Is it possible and if yes, how to do it?
Thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thank you for your post. Unfortunately, your requirement is unlikely to be met, as our current mechanism does not track the detection settings of other cameras.
- Copy Link
- Report Inappropriate Content
I am not sure I understand "trigger the preset of C540 if S355 detects a human".
- Copy Link
- Report Inappropriate Content
What I mean is,
Assume, I have set different preset positions (eg P1, P2, P3 etc) in PTZ section of my C540V. Now if my Insight S355 detects a human object which fall in the area of Preset P1, can I make C540V point to Preset P1?
- Copy Link
- Report Inappropriate Content
Hello,
Can anyone please help me on this query?
I have set different preset positions (eg P1, P2, P3 etc) in PTZ section of my C540V. Now if my Insight S355 detects a human object which fall in the area of Preset P1, can I make C540V point to Preset P1?
- Copy Link
- Report Inappropriate Content
Thank you for your post. Unfortunately, your requirement is unlikely to be met, as our current mechanism does not track the detection settings of other cameras.
- Copy Link
- Report Inappropriate Content
Thank you for the reply.
Based on your reply, I think you are thinking from the point of view of accessing detections of other camera.
However it is not required. At NVR level you are already fetching the Presets of PT Camera and all you need is to allow to select a preset based on Human detection just like you allow to trigger recording of other camera.
May be, if ok, I can send you a probable and easily implementable solution over email with all necessary details. Kindly share the Email for the same.
- Copy Link
- Report Inappropriate Content
Thank you so much for taking the time to post the issue on the TP-Link community!
To better assist you, I've created a support ticket via your registered email address and escalated it to our support engineer to look into the issue. The ticket ID is TKID250950815, please check your email box and ensure the support email is well received. Thanks!
Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.
Many thanks for your great cooperation and patience!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 260
Replies: 6
Voters 0
No one has voted for it yet.