Dsl light keeps flashing and no internet access
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
As the title says, the light keeps blinking and I can’t connect to the internet. Using the same cables (except for the power cable), the old modem works fine. I’m in Italy with TIM as my internet provider. I spoke with a TIM technician, and they said it’s not a TIM issue, but rather a modem-related problem. I’ve already tried resetting it and checking for firmware updates, but nothing worked. Thanks in advance for any response.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello@Giordan23 ,
Welcome to our community.
The DSL indicator keeps flashing, which means the DSL modem is unable to establish a solid connection with the DSL service.
Please refer to the following steps to troubleshoot:
1. Verify that you have purchased the correct TP-Link device for your internet plan (the ADSL modem router could not be used on VDSL service).
2. Remove the DSL splitter and replace a new DSL cable if possible.
3. Reset the modem by pressing and holding the reset button/pin hole for at least 5 seconds until all LEDs turn on momentarily to reset the modem router to factory default settings.
- Copy Link
- Report Inappropriate Content
Hello@Giordan23 ,
Welcome to our community.
The DSL indicator keeps flashing, which means the DSL modem is unable to establish a solid connection with the DSL service.
Please refer to the following steps to troubleshoot:
1. Verify that you have purchased the correct TP-Link device for your internet plan (the ADSL modem router could not be used on VDSL service).
2. Remove the DSL splitter and replace a new DSL cable if possible.
3. Reset the modem by pressing and holding the reset button/pin hole for at least 5 seconds until all LEDs turn on momentarily to reset the modem router to factory default settings.
- Copy Link
- Report Inappropriate Content
Hi @Joseph-TP
I should have an ADSL connection, and my speed is around 20–30 Mb. I don’t think that’s the issue though, since the modem page shows everything as fine for both ADSL and VDSL connections.
I’ve already tried resetting it, and I also removed the splitter and connected it directly to the wall, but the problem persists.
- Copy Link
- Report Inappropriate Content
Hi @Giordan23 ,
Thanks for getting back to me.
For your case, you have done all the troubleshooting that you can. Please get in touch with local support for further help.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2898
Replies: 3
Voters 0
No one has voted for it yet.