Home Network Community > DSL Modem Routers > Upload speed via cable too low
< DSL Modem Routers

Upload speed via cable too low

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Upload speed via cable too low

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Upload speed via cable too low
Upload speed via cable too low
2025-09-08 17:46:14 - last edited 2025-10-16 02:05:59
Model: Archer VX1800v  
Hardware Version: V1
Firmware Version: 0.12.0 2.0.0 v6092.0 Build 240329 Rel.14160n

Hi, I just succesfully installed the Archer AX1800 as an ADSL modem (using a RJ11 DSL connector installed by my internet operator. The speed provided is 250/50 Mbit/s and I am actually getting these speeds when connected to the WLAN. However, when I connect a laptop to the router through the UTP Cat6 cable (tried different ones), download speed reaches 250 Mbit/s, but the upload speed oscilates around 0,5 Mbit/s. There seems to be something wrong with the routers settings, but I cant find any ansfer to my problem. I would be grateful for any advice.
Thank you.

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Upload speed via cable too low-Solution
2025-09-09 08:29:55 - last edited 2025-10-16 02:05:59

Hello@Bonviki ,

Welcome to our community.

 

Is the model Archer VX1800v? Have you tested the wireless speed? Is it normal?

Please check the wired link speed and take screenshots. Please refer to this FAQ: How to check the associated/link speed on a wired client.

Please check the QoS settings of the modem, and set it to 1000Mbps for upload. Or, please disable it for comparison.

How to configure QoS on AC VDSL/ADSL Modem Router (new logo)

 

Best Regards.

Welcome to Community！ Get the latest posts: △New Firmware for Archer GE550/GE650 V1 Introduces AI-QoS, EasyMesh IoT Expansion, and More! △New Firmware Releases for Archer BE805 V1/BE450 V1 to Support VPN Merge, New ECO Mode, and More! More posts, please see: △ Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here— Subscribe for Updates! Urgent problems with your Wi-Fi Router, Range Extender, or DSL Modem? Please reach out via private Messages or @Joesph-TP in your new thread directly. Click △ Or ☆Recommended Solution if the post/answer helps.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Upload speed via cable too low-Solution
2025-09-09 08:29:55 - last edited 2025-10-16 02:05:59

Hello@Bonviki ,

Welcome to our community.

 

Is the model Archer VX1800v? Have you tested the wireless speed? Is it normal?

Please check the wired link speed and take screenshots. Please refer to this FAQ: How to check the associated/link speed on a wired client.

Please check the QoS settings of the modem, and set it to 1000Mbps for upload. Or, please disable it for comparison.

How to configure QoS on AC VDSL/ADSL Modem Router (new logo)

 

Best Regards.

Welcome to Community！ Get the latest posts: △New Firmware for Archer GE550/GE650 V1 Introduces AI-QoS, EasyMesh IoT Expansion, and More! △New Firmware Releases for Archer BE805 V1/BE450 V1 to Support VPN Merge, New ECO Mode, and More! More posts, please see: △ Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here— Subscribe for Updates! Urgent problems with your Wi-Fi Router, Range Extender, or DSL Modem? Please reach out via private Messages or @Joesph-TP in your new thread directly. Click △ Or ☆Recommended Solution if the post/answer helps.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 363

Replies: 1

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.