I finished setting up my VPN Omada gateway and all the network routing to get my home network setup. I went in to start doing some port forwarding and I can't seem to get my ports to go past the firewall. I tried for both the ports for WireGuard and for Minecraft, both result in still not Open. I was reading around will all the possible fixes like updating the firmware and stuff, but nothing so far has worked. Below is my setup:

Device: ER605 v2.20

Firmware: 2.3.3

I can confirm that it is not the ISP that has any sort of NAT in place to prevent this. My global IP starts with 173.XX.XX.XX and I called them to verify there was nothing blocking port forwarding.

When I set the port in Virual Servers, this is what my settings are:

I've tried changing that Internal Servier IP between the actual server and the IP of the gateway itself, but neither work.

After setting up the ports, here are the Access Control rules that I created to allow these through the firewall:

The service type is set based on the port I am trying to forward. For example, the one above is this:

Checking the port, it is always Closed/Filtered:

Is this all set up correctly or am I missing anything? Does anyone have any suggestions on what I can do to fix this? (preferably anything besides just wiping the whole system clean and trying to set it up again to see if it changed)