Er706w v1.0 failed to reconnect to Remote controller after each power fail
My cabin is running some network with solar panel and battery.
In darker day of winter I must shut down the power when i'm off site to save the battery.
Last winter, everytime I power up the system, everything work as usual perfectly.
This winter each time I power up the system, the Er706w and some other device stay disconnected from remote Omada controller (home)
The VPN (wireguard) don't come up so cabin is completly isolated from remote control (2 hours car drive)
The cabin network use Starlink as provider
The only way to reconnect the Er706 is to reset it and readopt it with the controller, doing this made configuration come back and other device automaticly reappear connected to the controller. Not very usefull for my wife and guest.
The power of the cabin Been on a timer in the winter for monitoring heating and battery, this problem cause lot of trouble managing the cabin. Adding time consuming to reconfigring it. The system is presently unreliable.
Firmware has been updated since last winter (firmware problem) , the system work flawless until this new winter
I joined the screenshot of the controller (cabin Site)


My best regards
Thank you
Gaétan
