Power extension lead length voltage drop

Power extension lead length voltage drop

Power extension lead length voltage drop
Power extension lead length voltage drop
a week ago
Model: Tapo C520WS  
Hardware Version:
Firmware Version:

What  the max length of power extension cable before the voltage drops too low and causes malfunction?

  0      
0
#1
Options
1 Reply
Re:Power extension lead length voltage drop
a week ago

  @Btman94o 

Hello,

It is generally not recommended to use an extension cable to power the camera, as this may affect its performance. Please consider the following points:

    1. The material and length of the extension cable may cause the voltage reaching the Tapo camera to be lower than the voltage it requires to operate, resulting in some unusual behavior, such as the camera automatically restarting at night or getting stuck when panning and tilting.

    2. Using extension cords outdoors may also increase the risk of lightning damage, which may void your product's warranty.

    3. If you must use an extension cord, please consider a cable with 22 AWG or thicker wire to minimize voltage drops and ensure your camera receives adequate power. Additionally, ensure the cable is properly waterproofed and lightning-protected.

For optimal performance, we recommend using the original power adapter and cord that came with the Tapo camera. You can check if the cameras can be placed in different locations with power outlets.

 

Best Regards,

  0  
0
#2
Options