my oc200 controller is online but my EAPS are disconnected
Hi Sirs,
My oc200 controller is online but all my EAPs being controlled by controller are disconnected.
For your assistance please.
Thanks!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@john.redcat
Would you be able to provide some more information on what you are seeing or how this is setup (APs types, connections, firmware versions etc). Any screenshots would also help
- Copy Link
- Report Inappropriate Content
Dear @john.redcat ,
john.redcat wrote
My oc200 controller is online but all my EAPs being controlled by controller are disconnected.
Disconnected status mean the connected device has lost connection with the controller for more than 5 minutes.
1. You may check the communication between the EAP and the controller, you can try pinging the EAP's IP address from the controller's end to see if it can be pinged through.
2. You can also try forgetting the EAP on the controller and re-adopt it to test.
Best Regards!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 526
Replies: 2
Voters 0
No one has voted for it yet.