ER605 - Stateful Packet Inspection via Gateway ACL Rules

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605 - Stateful Packet Inspection via Gateway ACL Rules

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605 - Stateful Packet Inspection via Gateway ACL Rules
ER605 - Stateful Packet Inspection via Gateway ACL Rules
2023-01-09 15:43:57
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.0.1 Build 20220223 Rel.68551

Good day.

 

On my ER605:

  • In the Omada configuration screen for Gateway ACLs I am not able to select a Network for a destination.
  • In the configuration screen for Switch ACLs I am able to select a Network for a destination.

 

It is my understanding (based on a youtube video) the functionality to select a Network as a destination for a Gateway ACL was made available in the most recent firmware update for the ER7206. It is also my understanding that configuring a Gateway ACL both with a Network source and Network destination properly sets up stateful packet inspection on the ER7206.

 

Can anyone tell me if there are plans to provide support for Network to Network Gateway ACLs in the ER605?

 

Or will stateful packet inspection only be available on the ER7206?

 

Or perhaps I am just plain misinformed.

 

Thanks for your time!!

 

Carl

 

 

 

 

@Fae 

  0      
  0      
#1
Options
1 Reply
Re:ER605 - Stateful Packet Inspection via Gateway ACL Rules
2023-01-10 05:58:18 - last edited 2023-01-10 05:59:27

  @clangren 

 

Currently only ER7206 received the update so it can do LAN-LAN ACL.

 

For ER605, the Gateway ACL can only apply to LAN-WAN direction, so the destination should be an outside network/IP.

 

But be patience, I heard that ER605 will receive the update soon.

 

Check this firmware release thread

  1  
  1  
#2
Options