ROUTER ER605 network switching between WAN->WAN/LAN1 does not work.
ROUTER ER605 network switching between WAN->WAN/LAN1 does not work.
The problem is FAILOVER and LOAD BALANCING not working correctly.
Three providers enter my router - WAN, WAN / LAN1, WAN / LAN2. I include in LOADBALANCING -> ENABLE LOAD BALANCING only. In Link Backup, I set the condition that WAN is Primary, WAN / LAN1 - Secondary, and I specify the rule (Failover(Enable backup link when any primary WAN fails).)
Then I prescribe in Online Detection DNS 8.8.8.8 and 8.8.4.4.
Now the biggest problem. At the enterprise people work through VPN - and they are connected to RDP. When LOADBALANCING is enabled, they are constantly thrown out due to the jumping IP address. Online banking in my country (Ukraine) reacts in the same way.
I want to implement switching between networks and only. i.e. Failover. If WAN 1 - the Internet is gone, then WAN / LAN1 is connected and so on.
If I turn off LOADBALANCING and everything else and leave only connected WANs, then the network still jumps from one to another and I do not get a stable Internet connection.
Please help me, as I have frequent network outages.