ER605: Traffic Redirection
Hi, I'm new here and would like some help. I have a TL-ER605 v2 Router with 2 ISPs (1 and 2) on port 1 and 2 respectively. I wanted to create 3 vlans and direct traffic as follows: Port 3 -> use the internet of both ISPs through vlan30. Port 4 -> use the internet only at ISP1 through vlan40. Port 5 -> use the internet only at ISP2 through vlan50. Is this configuration possible? Is there a better way to direct traffic from ISPs?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
To create the vlans do you have a vlan capable switch? Ideally an omada SDN switch and controller is what you are after
If so you can setup policy routes on your vlans to accomplish what you ask
- Copy Link
- Report Inappropriate Content
Hi @pleite
Thanks for posting in our business forum.
With the help of Policy Routing, you can do this.
But you gotta finish creating the VLAN interfaces and assign them correctly.
Configure VLAN 40 and 50 with Policy Routing and you can do it. Don't need to create Policy Routing for VLAN 30.
- Copy Link
- Report Inappropriate Content
To create the vlans do you have a vlan capable switch? Ideally an omada SDN switch and controller is what you are after
If so you can setup policy routes on your vlans to accomplish what you ask
- Copy Link
- Report Inappropriate Content
Hi @pleite
Thanks for posting in our business forum.
With the help of Policy Routing, you can do this.
But you gotta finish creating the VLAN interfaces and assign them correctly.
Configure VLAN 40 and 50 with Policy Routing and you can do it. Don't need to create Policy Routing for VLAN 30.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 705
Replies: 3
Voters 0
No one has voted for it yet.