Is it V3.0 or V3.6?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Is it V3.0 or V3.6?
Tags:
#Firmware Update
I have a new TL-SG1428PE up and operational in our network but I went to update the firmware and am confused if it is Hardware Version 3.0 or 3.6.
The Management portal has a hardware version of TL-SG1428PE 3.0 but the cardboard box it came in says 3.6. I checked for a label on the chassis, but found none but can not see the bottom of the chassis as the unit is already physically installed/mounted on a wall.
I hate to have to schedule downtime and effort to unmount from the wall to see the bottom, so anyone have any ideas on which hardware version this device is?
Thanks in advance!
Michael
1 Accepted Solution
Re:Is it V3.0 or V3.6?-Solution
Best Regards!
If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post.
Look for a model? Search your model NOW
Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚
☛ ★ Configuration Guide ★ ☚
☛ ★ Knowledge Base ★ ☚
☛ ★ Troubleshooting ★ ☚
● Be kind and nice.
● Stay on the topic.
● Post details.
● Search first.
● Please don't take it for granted.
● No email confidentiality should be violated.
● S/N, MAC, and your true public IP should be mosaiced.
Re:Is it V3.0 or V3.6?-Solution
Best Regards!
If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post.
Look for a model? Search your model NOW
Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚
☛ ★ Configuration Guide ★ ☚
☛ ★ Knowledge Base ★ ☚
☛ ★ Troubleshooting ★ ☚
● Be kind and nice.
● Stay on the topic.
● Post details.
● Search first.
● Please don't take it for granted.
● No email confidentiality should be violated.
● S/N, MAC, and your true public IP should be mosaiced.