Hi does anybody have similar issue.

Unpacked new device able to login and change password on stand alone install.

Can manage device via default ip 192.168.0.1

When i change vlan no 1 addressing from default to 192.168.x.1 and dhcp also  i am getting dhpc address properly .

After connection to device with new ip 192.168.x.1 it is giving me an error "invalid user id or password " although it was working before.

I have tried another way to create new vlan no 2 with new addressing and new DHCP pool but it is not distributing addresses. So i can only use default pool.

I need to setup my custom address and dhcp but not able to do on my ER605 it works like i wanted but wanted to repeat that on bigger machine.