SG3210, ES205GP - VLANs
SG3210, ES205GP - VLANs
I've recently tired to add a ES205GP in between my two SG3210. This is to make the run between the two switches less than 100m.
This was working fine with a SG1005P but when I added and adopted the ES205GP I was unable to receive any IP adressses for clients downstream of the ES205GP.
When the switch was inline on the network I was able to see all the access points, controller, router and switches.
It looks like there were no IP addresses being issued to clients though.
All the devices are on fixed IP addresses from 192.168.10.2 to 192.168.10.12.
Re:SG3210, ES205GP - VLANs
Hi @MR.S
Thanks for posting in our business forum.
Could be this reason:
Troubleshooting Topology in Controller Is Not Recognized Properly
It is not fully LLDP-supported.
Best Regards!
If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post.
Look for a model? Search your model NOW
Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚
☛ ★ Configuration Guide ★ ☚
☛ ★ Knowledge Base ★ ☚
☛ ★ Troubleshooting ★ ☚
● Be kind and nice.
● Stay on the topic.
● Post details.
● Search first.
● Please don't take it for granted.
● No email confidentiality should be violated.
● S/N, MAC, and your true public IP should be mosaiced.
