Support Multiple Fixed IP Subnets from ISP through PPPoE

Support Multiple Fixed IP Subnets from ISP through PPPoE

Support Multiple Fixed IP Subnets from ISP through PPPoE
Support Multiple Fixed IP Subnets from ISP through PPPoE
21 hours ago - last edited 21 hours ago
Model: ER7412-M2  
Hardware Version: V1
Firmware Version: 1.1.0 Build 20251015 rel.63594

Currently my organization just subscribed 5 fixed IP in total (/29 of subnet). I noticed that the gateway only support single IP address (First IP from fixed) and does not support WAN alias through PPPoE connection (This is required by ISP and must specific VLAN tagging).

 

I already fed up to configure again the WAN links for each public IP address map to specific local IP through One-To-One NAT. 
 

I need to know that when Omada ecosystem will add this support (WAN alias through PPPoE connection, or something can handle multiple public ip address subnet in single WAN links)? I already adopted full Omada Network Ecosystem in whole organization)

  0      
0
#1
Options
2 Reply
Re:Support Multiple Fixed IP Subnets from ISP through PPPoE
20 hours ago

  @Oscar521 

 

If you need specific vlan tags for each public IP, you should be able to set this up with Virtual WANs

 

 

  0  
0
#2
Options
Re:Support Multiple Fixed IP Subnets from ISP through PPPoE
20 hours ago - last edited 20 hours ago

  @GRL 

 

I already tested above function using static ip and pppoe, still same. 
 

Our ISP only connect PPPoE through VLAN500 (TM UniFi) tagged.

 

When I want set second virtual WAN with same VLAN settings, PPPoE ID and password still not allowed. Using static IP keeps offline

 

Omada system not allow single WAN VLAN to multiple Physical + Virtual WAN, but this is only the way to match ISP config

  0  
0
#3
Options

Information

Helpful: 0

Views: 54

Replies: 2