Ray, thanks for the checkback. Glad to hear things worked out for you in the end. I've been running controller based Meshes for a couple of years now and when the signal is good, they really seem...

Please try the POE injector approach, that will remove the layer2 issue from the equation that is introduced by having an active device like a switch or router inbetween the EAP and the camera....

@blindox 1. No, but it wouldn't take much to add a pihole to your setup. That might give you the level of detail you seek. 2. Add an Omada controller, that will keep BW stats per SSID, and typically...

@youbarajsha Here what I used back when I had Starlink at one of my sites. Just change the 192.168.100.1/24 subnet to 192.168.1.1/24 and you should be good.

I've been trying to extract the OIDs but having some issues (time being the biggest). If you want to find them for yourself, I highly recommend the SNMPWALK tool.

@nuss it's probably something funky with the extra switch in the path after the mesh and ARP. If you use a POE injector instead of the POE switch does it work then? Remember that devices connected to...