@rayvoll You can leave the 2.4G radios on and use them freely, but disable any SSIDs on the 5.8G. You will be more than fine at 50Mbps assuming your distance is reasonable (say <150'/50m) and you...

@youbarajsha What's the management IP of the modem when in bridged mode? You just need to create a static route for that IP/subnet via the WAN port.

@rayvoll Actually, using the OC200 in series between the modem and wired AP will limit your throughput to ~90Mbps max, as those two ports on the OC200 are only 100Mb capable. Either add a cheap ($20)...

@KTuulos The graph is from LibreNMS which is a freeware SNMP polling and logging tool. It provides much better granularity than the limited output from the Omada controller. I use it to monitor the...

@dbdan22 Me three with @Virgo . Corrugated steel is pretty much the definition of RF impenetrability. Powerline sounds so much more doable/reliable unless you have some hope of going 'around' the...

@Virgo Pretty sure it will work, I used the process to move from an OC200 to a Raspberry PI clone solution (so hardware to software).