@Craig2477 Your indoor 225 should connect at 1G too. If it isn't, then you have a cabling/connector/switch port issue that you need to address.

@Getumzz When a wireless 225-outdoor meshes with a wired 225-outdoor, the ethernet port of the meshed AP appears as if bridged to the same switchport as the wired AP is connected to. So yes, you can...

@p4f Are you saying, with a wired root and two child wirelessly meshed APs, that if you remove power from either child, then they ALL show as disconnected?

@Exejee Fae is correct, the controller is what you need to track usage over time, the data is stored in a database and you can adjust the reporting timeframes to show monthly usage, max speed etc....

@Vince_K You have a couple of options here. Sun Shade. Some 4" white PVC pipe extending 4-6" above the body of the EAP225 and an inch or so below. Cut slots on either side to allow the antennae to...

@junkimchi @Clive_A Clive, this sounds like a bug, wired ports on a wall AP shouldn't behave differently just because the client SSIDs were disabled.