@KMPLSV You can't tick the 'Guest' network box if you want the guests to have access to local resources, as guest mode prevents them from interacting with any private IP. Instead, you'll have to...

@doremifajb Whole lotta questions in there :) Ok. Since you seem to have a mission critical system AND you are running your controller on a Pi I'm going to suggest you basically start from scratch...

https://www.tp-link.com/ca/business-networking/soho-switch-poe/tl-sg105pp-m2/ is POE+ AND 2.5Gbps. It makes a good POE port expander but is not manageable by Omada...in fact there is no manageable...

@backf1sh 12VDC, 2A (24W) with what looks like a 2.5mm? center positive plug. Unless you are meshing these and don't have cabling, I would strongly recommend you consider POE+ via something like the...

@d0ugmac1 Sorry Hank, I might be chasing ghosts. It looks like only the router WAN and all switch ports get labelled. No router/gateway LAN ports are labelled...is this by design?

@Clive_A HI Clive, here's one for your attention.