Hello, @Philbert @Roblox Snooping has to be used in home context if the ISP carries TV and VoD over its own multicast network. Using it over own home switch allows to avoid avalanche effect at home...

Hello, I´ḿ currenlty using the X50 system in access point mode. But when seeing that static route setting is now available for use i tried it in router mode. In IPv4 : As there's no vlan on DECOs i...

Hello, today, i switched my master X50 deco into router mode in IPv4 and in IPv6 behind my ISP router. Bug : X50 gets my fd02::/64 network and associates with its own fd02::xxxx:xxxx:xxxx:xxxx...

@VladimirAlexiev Try "client mode" on dlink or archer, and keep deco as your network needs it to be (router or AP it is the same) : two APs cannot naturally communicate with each other unless being...

@Dinreko Did you restart or renew all the IPs on all your devices ? Switching to AP mode will remove the deco's private address range (and the DECO's router too). You'll be on your modem/router...

@VladimirAlexiev OKAY, through your last post i see a better picture of it. It seem to be at a lower level than i firstly expected. There's not established physical link. first DECO and Archer are...