@Vladimir2 This is more like a feature request (routers) and could be implemented in a new FW release. Wireless scheduler will turn on both radios no matter that you've disabled one of them earlier.

@sugar0 To allow access to your AP for a particular device (described by its MAC address) you should use Allow filtering rule as bellow: You have to add all device that should have access to the AP....

@Cambazz Archer MR400 v4 and above support only OpenVPN and PPTP VPN Server: Here's a guide for configuring OpenVPN Server. Here's a guide for configuring PPTP Server. It doesn't support a VPN Client...

@Zebop917 Probably this post will shed some light on that matter. Follow the FAQ posted and check if that suits your needs.

@Pidi If you haven't created a password the default username/password is admin/admin. If you've created a password use that password. If neccessary reset the router to its factory defaults (using...

@Zebop917 Make sure that your IP address reservations are below 192.168.1.99 (within VR400 DHCP server pool). Use the IP addresses above 192.168.1.100 for fixed IP addresses that are set on your...