@stoptaggingme Here's the link to the FW release in question with notes on what has been changed/improved. a) This is a genuine upgrade. b) It may still be unavailable on some regional support...

@Eur0star You have to put Vr600 in bridge mode for this to work. Check out this story. There's a another guide for using this type of configuration here.

@RussC Check your cable modem DHCP configuration. Its DHCP server should be turned OFF if you use AX50 as a main DHCP server. What is happening, is probbably some of your devices receive their IP...

@DFK93 Here's the problem with double NAT: ISP Modem (192.168.0.1) ==> DecoM9+ (192.168.1.1) If you put your Deco's in AP mode then the only router in your network would be the ISP modem and the...

@myke52 As long as there's no switch off button for OneMesh feature in the device web management interface, it would still emit the hidden networks as referenced in the thread I posted. The button...

@SharphSonirak In your case only a UPS will solve that issue - if you plan to use the UPS only for the modem, you can buy an inexpensive one.