Kasa Smart Thermostat
This Article Applies to Kasa KE100 Phenomenon Description Overheating 1. Continuous heating with the temperature significantly exceeding the set value 2. Persistent fluctuation beyond the preset tempe
Abnormal Heating
5Helpful
9389Views
This Article Applies To KE110(EU) V1.0 - Firmware 1.1.0 Build 250225 Rel.192437 The KE100 that is linked with the KE110 Description When linking a KE100 to a KE110, you may find that the Smart Control
Smart Control/Schedule
9Helpful
7100Views
Temperature & Humidity Monitoring ▷ Real-Time Data Child Lock, Room humidity, target temperature, Room temperature, Open window detection, and Heating State. ▷ High-Accuracy ±3%RH ±0.3℃ / ± 0.54℉ Humi
What’s New
1Helpful
8615Views
I got Hub and TRV kit but they all are connected with home wifi I can control each radiator but how can hub connect with main boiler, currently boiler is connected with old thermostats, can't find any
0Helpful
59Views
the ke110 is not following the shedule sometimes after I changed the temperature manually. And the next smart control setting reached. And often I cannot even change the temperature manually. The ke11
By
retro_
· Latest post Wednesday
by doublebstyle
1Helpful
546Views
I cannot find the answer to this simple question in the user guide or searching online. When the KE100 is on it opens and closes the radiator valve depending on the set temperature. This is the purpos
Smart Control/Schedule
1Helpful
133Views
Have purchased a KE100kit. Opened the package, plugged in the KH100 hub, paired with the TAPO app assuming I would be able to control all devices through the TAPO app. The hub was added, updated firmw
Kasa App Related
By
blazehelm
· Latest post 2 weeks ago
by Randomname67
0Helpful
243Views
I've found the posts that say have a gap between rules and that has worked so early start does something. Currently I have 90 minutes gap. However none of my thermostats seem to run for more than 30-4
Smart Control/Schedule
By
FlyingPastor
· Latest post 2 weeks ago
by FlyingPastor
0Helpful
280Views
I'm trying to bind a KE110 sensor to a KE100 Valve using the H100 hub and Tapo App. I get a "Network unstable" message or simply "Failed", even when all three are 4 inches apart! Both devices are conn
Tapo App RelatedTemperature Calibration
By
Charliepsycho
· Latest post 2 weeks ago
by Jebeyer
0Helpful
143Views
I know this was discussed up until about a year ago. I have just bought one (before I read that thread) and it looks as though the problem is still evident. My temperature is set for 20, and in the mo
Temperature CalibrationSmart Action
0Helpful
188Views
0Helpful
84Views
I'm looking to buy thermostats for all of my 14 Radiators. These talk to a Kasa Hub (hoping I can link in with my Tapo Smart home too) But I don't understand how it controls the boiler. I currently ha
InstallationPresales
1Helpful
4298Views