Tapo Smart Switch Forums - TP-Link Community

The story was originally posted by Riley_S in Matter: A Step Forward in Smart Homes Matter: The Next Big Step for Smart Devices Over the next few months, you may start hearing a lot more about new tec

By

Solla-topee · Latest post 23 minutes ago by salim2024

14Helpful

4834Views

5Replies

Unable to remove Tapo S210 automation

I had automation set up in Tapo app which used the T100 sensor to switch on my attic stair lights with a S210 switch. That worked fine but now I'm switching to Home assistant automations and wanted to

By Igord123 · Latest post 9 hours ago by Wayne-TP

0Helpful

181Views

3Replies

Cannot reset S200B

I am trying to setup a new switch. It failed to connect to the H200 hub - I have tried to reset it but cannot get it to the flashing LEDs as per instructions (5 sec press then 3 quicks presses). I hav

Installation

By JonNz · Latest post Thursday by Gerry_D

2Helpful

500Views

11Replies

Combined or separate smart actions?

I'm using one smart button to collectively activate 2 cameras privacy mode with two clicks and deactivate them with a single click inside one single smart action. It seems to be working, but I wonder

Smart Actions

By MarioInJapan · Latest post a week ago by MarioInJapan

0Helpful

101Views

2Replies

Visible or audible confirmation of automated actions

With the help of this smart switch, I’ve successfully automated the Privacy Mode ON/OFF switching on two cameras with a single push and a double push, respectively. This setup works well, but to confi

Automation TricksSmart Actions

By MarioInJapan · Latest post a week ago by MarioInJapan

0Helpful

111Views

3Replies

Tapo S220 – Separation of Physical Buttons from Outputs

I have a feature request to enhance the flexibility of S220. Currently, the S220 is “hardcoded” with the left button physically linked to output A and the right button to output B. While this basic fu

Feature Request

By Maciej54 · Latest post a week ago by Maciej54

0Helpful

154Views

4Replies

Enquiry how to deal with S220 with 2 COM

Hi, I found an issue when I would try to replace old switch with S220. In which I will put Old Left L1 (Brown) -> new L1 Old Right L1 (Brown) -> new L2 Old Left COM (Red) -> ? Old Right COM (Red) ->?

Installation

By eddiehk · Latest post 2 weeks ago by Wayne-TP

0Helpful

128Views

1Replies

Troubleshooting Tapo Automation: Smart Plug Fails to Turn On at Low Temperature

With the weather getting colder, I thought I’d give my Tapo smart home setup a new twist. I set an automation to turn on the smart plug whenever the temperature drops below 12°C. Seemed simple enough—

By DDRIII · Latest post 3 weeks ago by Wayne-TP

0Helpful

156Views

3Replies

writing UK

Hi, I ma struggling to swap my current 2 way to tapo s220

By LukeNN8 · Latest post 3 weeks ago by Wayne-TP

0Helpful

118Views

3Replies

Not connecting all smart switch to wi-fi

Hi everyone, I wanted all the switches at the house to match but do not want to connect them all to wi-fi. Is there a way to stop the switches from blinking orange and green and stay just green withou

By Shahaf89 · Latest post 3 weeks ago by Wayne-TP

0Helpful

103Views

1Replies