HS200 on and going off immediately

HS200 on and going off immediately
HS200 on and going off immediately
2018-12-15 18:53:01

Just installed HS200 switch and it’s going off from green to yellow as soon as it’s on. 

0
0
#1
Options
7 Replies
Re:HS200 on and going off immediately
2018-12-16 15:02:06
That's often a wiring problem, either an incorrect white (neutral) wire connection or trying to use the switch in a "power through fixture" circuit.
AutomationManager: Secure home automation without relying on cloud servers.
0
0
#2
Options
Re:HS200 on and going off immediately
2018-12-21 23:46:25

"Often"?  What are teh other possibilities?  What does ""power through fixture" curcuit" mean?  In 30 years of remodeling I've never heard that term.

1
1
#3
Options
Re:Re:HS200 on and going off immediately
2018-12-27 21:00:33
I think he means the fixture is improperly wired and the neutral is switched rather than the feed.
0
0
#4
Options
Re:HS200 on and going off immediately
2019-01-02 23:37:03

I have the same issue. The second I press the switch on the wall or power on via the app. The lights flicker on but immediately turn off. Has anyone found a solution to this yet?

0
0
#6
Options
Re:HS200 on and going off immediately
2019-01-06 16:20:35

I have the same problem too, any anwers yet

0
0
#7
Options
Re:Re:HS200 on and going off immediately
2019-01-06 20:52:59

Same issue here. I thought it might be because the same light fixture can be controlled by another switch upstairs, but from what I'm reading that shouldn't be a problem.

0
0
#8
Options
Re:HS200 on and going off immediately
2019-01-09 02:50:01

Yes, its a neutral wiring problem. I followed the instructions exactly (being an amateur) and was having the same problem. I checked this forum and read the comment that it is the neutral wire. I had initially wired mine where I took one of the neutral wires from the the bundle in my box and connected it to the switch neutral wire, putting the rest back in their bundle. This is apparently wrong - I don't think the instructions were clear here. I fixed it by adding the adding the neutral wire on the switch (and the one I had I connected it to) back to the whole bundle. Now it works fine.

0
0
#9
Options