network configuration issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
network configuration issue
network configuration issue
2019-01-10 19:49:29 - last edited 2019-01-20 21:28:29

Hi

 

I recently purchased some powerline-av 600 adapters, and although they seem to work okay, I have a small issue with them, which I would like some thoughts on.  Although the kit is pretty straightforward to set up I have noticed that my wired connection now says "unidentified network".  I have obviously checked this by removing the adapters, and my wired network identifier returns to normal, however despite quite a bit of messing about, the problem stubbornly persists.  Any ideas?

 

tom

0
0
#1
Options
1 Accepted Solution
Re:network configuration issue-Solution
2019-01-20 21:28:11 - last edited 2019-01-20 21:28:29

hi

 

model no. is tl-pa4010 all three led's are stable during operation

Recommended Solution
0
0
#3
Options
3 Reply
Re:network configuration issue
2019-01-11 09:22:29

What's the MODEL #? And LED status? 

 

Check the Ethernet port on the powerline by changing cable, computer.

 

 

0
0
#2
Options
Re:network configuration issue-Solution
2019-01-20 21:28:11 - last edited 2019-01-20 21:28:29

hi

 

model no. is tl-pa4010 all three led's are stable during operation

Recommended Solution
0
0
#3
Options
Re:network configuration issue
2019-01-24 11:16:09

Is the connection from the router stable? You can use the PC to replace the main adapter, use the same cable connected to the router and check the connection.

 

By the way, if the firmware is not the latest one, you can try to upgrade firmware.

0
0
#4
Options