Home Network Community > Adapters > No wireless Nic Plug in
< Adapters

No wireless Nic Plug in

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

No wireless Nic Plug in

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
No wireless Nic Plug in
No wireless Nic Plug in
2019-03-25 23:06:32
Model: TL-WN822N  
Hardware Version: V3
Firmware Version: 3.0

Ya instale el programa pero no me reconoce la Usb Inalambrica

Necesito ayuda

  5      
 
  5      
 
#1
Options
11 Reply
Re:No wireless Nic Plug in
2019-04-08 17:56:37

Hello, 

 

I think I have the same Issue. 

 

I am running MacOSX Mojave 10.14.4 and have TP-WN823N V2 USB Wifi. 

 

I get following error messages when starting the StatusBarApp in the terminal: 

 

$ sudo ./StatusBarApp 
/BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleFSCompression/AppleFSCompression-96.200.3/Common/ChunkCompression.cpp:49: Error: unsupported compressor 8
/BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleFSCompression/AppleFSCompression-96.200.3/Libraries/CompressData/CompressData.c:353: Error: Unknown compression scheme encountered for file '/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources/Exceptions.plist'
/BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleFSCompression/AppleFSCompression-96.200.3/Common/ChunkCompression.cpp:49: Error: unsupported compressor 8
/BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleFSCompression/AppleFSCompression-96.200.3/Libraries/CompressData/CompressData.c:353: Error: Unknown compression scheme encountered for file '/System/Library/CoreServices/CoreTypes.bundle/Contents/Library/AppExceptions.bundle/Exceptions.plist'
2019-04-08 19:24:12.842 StatusBarApp[497:5457] System languages array= (
    en
)
2019-04-08 19:24:12.842 StatusBarApp[497:5457] System preferredLang= en
2019-04-08 19:24:12.842 StatusBarApp[497:5457] Bundle preferredLocalizations (
    English
)
2019-04-08 19:24:12.854 StatusBarApp[497:5457] BundleIDstr=com.realtek.utility.statusbar
2019-04-08 19:24:12.854 StatusBarApp[497:5457] BundleVer=5.0.5.b8
/Library/Application Support/WLAN/StatusBarApp.app: code object is not signed at all
In architecture: i386
2019-04-08 19:24:12.905 StatusBarApp[497:5457] bAppSigned=0
2019-04-08 19:24:12.905 StatusBarApp[497:5457] bReadOnlyPath= 0
2019-04-08 19:24:12.905 StatusBarApp[497:5457] MachineName: Macmini8,1
2019-04-08 19:24:12.906 StatusBarApp[497:5457] osKernelVersion= 18.5.0
2019-04-08 19:24:12.906 StatusBarApp[497:5457] U2U3_MacOSX 10.0.0
2019-04-08 19:24:12.906 StatusBarApp[497:5457] countryCode= AT
2019-04-08 19:24:14.130 StatusBarApp[497:5457] RTCheckForHang:[Case 1]: No Wireless NIC Plug in
2019-04-08 19:24:14.130 StatusBarApp[497:5457] MenuItemPlugOut
2019-04-08 19:24:14.159 StatusBarApp[497:5457] MenuItemPlugOut :: MenuItem_RfOnOff setHidden = TRUE

 

I think there is a problem either with APFS file system or something similar.

 

Best regards, 

Fox 

  0  
  0  
#2
Options
Re:No wireless Nic Plug in
2019-04-08 19:00:58

Hi, 

 

even if I have the TL-WN823N V2 Wifi, I had to install the latest TL-WN823N V3 driver. With the V3 driver my V2 version worked. 

 

Best regards, 

Fox

  1  
  1  
#3
Options
Re:Re:No wireless Nic Plug in
2019-04-23 21:22:32

I experience the same problem running TP-LInk AC600 with driver V3 on MacOS 10.14.3.

It shows No Wireless NIC plug in.

 

Can anyone give suggestions to solve the problem?

 

 

I have also tried driver V2. The system shows connected, but there is no connection. I have updated to V3. However, it is getting worse.

 

 

  41  
  41  
#4
Options
Re:No wireless Nic Plug in
2019-04-24 04:34:47

my Archer T2U Nano V1 does not work on MacOS 10.14.3 too....

  0  
  0  
#5
Options
Re:Re:Re:No wireless Nic Plug in
2019-04-24 07:04:34

Hi,

 

What is the model number of your network adapter？

 

Once you installed the V2, can the adapter/NIC be detected? And can you see any wifi networks? 

 

Per you said, if it is connected but no internet access, what is the IP address and router obtained by your PC at that time? Below is the instruction: 

https://www.tp-link.com/en/support/faq/838/ 

 

Good day. 

 

oooha wrote

I experience the same problem running TP-LInk AC600 with driver V3 on MacOS 10.14.3.

It shows No Wireless NIC plug in.

 

Can anyone give suggestions to solve the problem?

 

 

I have also tried driver V2. The system shows connected, but there is no connection. I have updated to V3. However, it is getting worse.

 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  1  
  1  
#6
Options
Re:Re:No wireless Nic Plug in
2019-04-24 07:06:02

Hi,

 

Have you ever installed the driver for Mac 10.14?

https://www.tp-link.com/en/support/download/archer-t2u-nano/#Driver

 

Meanwhile, after the installation, can you see any wifi networks? Can you connect to your host network then? 

 

Any updates, please let me know. 

 

Good day.

AuroraCC wrote

my Archer T2U Nano V1 does not work on MacOS 10.14.3 too....

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#7
Options
Re:No wireless Nic Plug in
2020-12-02 15:10:01

I’ve been using the TL-WN725N version 1 WiFi driver. Recently macOS was updated to macOS BigSur and since then the driver is not working.

 

  6  
  6  
#10
Options
Re:No wireless Nic Plug in
2020-12-03 07:19:25

@Naveen046 

 

Hello, sorry to hear that this adapter is not working with your new macOS Big Sur system.

 

We are taking high priority with the chipset manufactures to work this out, and we will update the status as soon as we have a new driver. While we currently cannot provide you an ETA yet, we hope you could wait.

 

BTW, I found a customer resolved his issue by installing the driver on his macOS Big Sur, you may check if you can make yours work as well:
https://community.tp-link.com/en/home/stories/detail/1642
Note: this may require to disable the SIP and give the authority of this App on your macOS, which is not recommended by Apple, it's up to you whether you want to try this.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  1  
  1  
#11
Options
Re:No wireless Nic Plug in
2021-02-17 18:38:57

@Kevin_Z 

Hello have you guys found the way to make this TL-WN725N to work on MAC OS Big Sur System yet...? before I take your option below, please advise...thanks.

  0  
  0  
#12
Options
Re:No wireless Nic Plug in
2021-02-17 18:44:12
This worked for me. Many thanks :)
  7  
  7  
#13
Options
12

Information

Helpful: 5

Views: 15470

Replies: 11

Related Articles
No Wireless Nic Plug in for Mac os
190 0
 Archer T3U "No Wireless NIC plug-in"
1783 0
  No wireless Nic plug, on Mac OS Monterey
662 0
 Unistall NIC Plug-in Mac OS Monterey
723 0
 Wireless plug
175 0
 TL-WR940N NIC isolation
425 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.