Adding to existing powerline setup

Adding to existing powerline setup
Adding to existing powerline setup
2019-06-29 16:57:12 - last edited 2019-07-02 03:44:07
Model: TL-PA4010
Hardware Version:
Firmware Version:

I have an AV500 PA4010P set up bought a 2/3  years ago - comprises two plug in adaptors.  I would like to extend the wifi further in the house and into a new garden room which has power.  Can I simply buy more adaptors and just plug them in to the mains sockets?  And if so what model should i buy?  Or do I need to start again with new kit?  Any help gratefully received. Thanks.  Rick

0
0
#1
Options
1 Accepted Solution
Re:Adding to existing powerline setup-Solution
2019-07-01 07:50:34 - last edited 2019-07-02 03:44:07

Hi,

 

All the TP-Link powerline adapters are compatible with each other. 

 

If you want to add another  powerline adapter into the current 4010, it is suggested to buy a 4 series, like TL-WPA4220, TL-WPA4226. 

https://www.tp-link.com/home-networking/powerline/

Note: The mode starts with TL-WPAxx supports wifi function, while TL-PAXXX does not.

 

And you only need press the pair button  to add the new unit.

 

Instruction as below:

https://www.tp-link.com/support/faq/258/

 

Good day.

 

 

 

Recommended Solution
0
0
#2
Options
3 Reply
Re:Adding to existing powerline setup-Solution
2019-07-01 07:50:34 - last edited 2019-07-02 03:44:07

Hi,

 

All the TP-Link powerline adapters are compatible with each other. 

 

If you want to add another  powerline adapter into the current 4010, it is suggested to buy a 4 series, like TL-WPA4220, TL-WPA4226. 

https://www.tp-link.com/home-networking/powerline/

Note: The mode starts with TL-WPAxx supports wifi function, while TL-PAXXX does not.

 

And you only need press the pair button  to add the new unit.

 

Instruction as below:

https://www.tp-link.com/support/faq/258/

 

Good day.

 

 

 

Recommended Solution
0
0
#2
Options
Re:Re:Adding to existing powerline setup
2019-07-01 14:39:37

Kevin_Z wrote

Hi,

 

All the TP-Link powerline adapters are compatible with each other. 

 

If you want to add another  powerline adapter into the current 4010, it is suggested to buy a 4 series, like TL-WPA4220, TL-WPA4226. 

https://www.tp-link.com/home-networking/powerline/

Note: The mode starts with TL-WPAxx supports wifi function, while TL-PAXXX does not.

 

And you only need press the pair button  to add the new unit.

 

Instruction as below:

https://www.tp-link.com/support/faq/258/

 

Good day.

 

 

 

Many thanks Kevin. Will get to the shops asap!! Rick

0
0
#3
Options
Re:Re:Re:Adding to existing powerline setup
2019-07-02 03:43:42

Hi Rick,

 

You are most welcome. Glad to help you.

 

If need more help, do not hesitate to contact us.

 

Nice day. 

 

 

0
0
#4
Options