Wds bridge between Archer D2 and Fiber Modem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Wds bridge between Archer D2 and Fiber Modem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Wds bridge between Archer D2 and Fiber Modem
Wds bridge between Archer D2 and Fiber Modem
2019-08-25 07:35:27 - last edited 2019-08-27 01:04:34

Hey Guys,

i have a situation with my tp-link product , hope you can guide me to solve it . 

i recently purchased a fiber modem ( from fiberhome ) & i need to extend the wifi with my tp-link Archer D2

as i already checked my D2 config , the "wds bridge" option is only available on 5 ghz networks & i think my fiber modem is working only on 2.4 ghz

so what options do i have here ?

  0      
  0      
#1
Options
1 Accepted Solution
Re:Wds bridge between Archer D2 and Fiber Modem-Solution
2019-08-26 06:30:08 - last edited 2019-08-27 01:04:34

@Kouros 

 

Hello, per you know, the Archer D2 supports WDS bridging feature for 5GHz only, that is to say, it cannot connect to the fiber modem which supports 2.4GHz only.

 

While if you want to use Archer D2 to extend the wifi range, you can configure it as an access point. 

 

Below is an instruction you can refer to :

https://www.tp-link.com/support/faq/417/

Note: The model number is different, while the setup steps are the same. 

 

Good day. 

 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:Wds bridge between Archer D2 and Fiber Modem-Solution
2019-08-26 06:30:08 - last edited 2019-08-27 01:04:34

@Kouros 

 

Hello, per you know, the Archer D2 supports WDS bridging feature for 5GHz only, that is to say, it cannot connect to the fiber modem which supports 2.4GHz only.

 

While if you want to use Archer D2 to extend the wifi range, you can configure it as an access point. 

 

Below is an instruction you can refer to :

https://www.tp-link.com/support/faq/417/

Note: The model number is different, while the setup steps are the same. 

 

Good day. 

 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:Re:Wds bridge between Archer D2 and Fiber Modem
2019-08-26 12:18:16

Thank you @Kevin_Z for your great information...i would have preferred using wds bridging but unfortunately as you mentioned i should use lan ports...

 

  0  
  0  
#3
Options
Re:Re:Re:Wds bridge between Archer D2 and Fiber Modem
2019-08-27 01:03:58

@Kouros 

 

Thanks for your reply, sorry for the inconvenience cause only 5GHz supports the WDS birdging function, we are not able to connect to the fiber modem which supports 2.4GHz only instead. 

 

You can use Archer D2 as a wired repeater to extend the wifi range or you can order a range extender to do that. Like TL-WA850RE, RE450. 

https://www.tp-link.com/en/home-networking/range-extender/

 

May it help and have a nice day. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options