change from plc 600 to 1300

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

change from plc 600 to 1300

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
change from plc 600 to 1300
change from plc 600 to 1300
2019-08-26 19:16:13 - last edited 2019-08-26 19:17:37
Model: TL-PA8030P KIT  
Hardware Version: V2
Firmware Version: 170704

Good day,

 

I changed from plc 600 to 1300 to connect my pc via gigabit lan connection.

 

i got about 170Mbps download through my suplier.

 

Before with the old av600 the connection between av600 was about 200 Mbps and the speed i was recieving was 

about 85mbps because my pc was connected with 100Mbps protocol.

 

I bought the av1300 because i thought that after i will connect with gigabit protocol i would recieve the whole speed.

 

Now its much worst :P the devices are connected with 300Mbps but when im doing a speed test it dont get more than 10Mbps,

with wifi i am getting at least 150 so its not my inetrent connection.

 

best regards

 

sorry for my english

  0      
  0      
#1
Options
1 Reply
Re:change from plc 600 to 1300
2019-08-27 03:02:56

@cptplats 

 

Hello, how many powerline adapters do you have and what are their model numbers?

 

What is the current network topology.diagram? How do you connect them together? 

 

What is the light status of the powerline adapters, especially the powerline led(middle house led).

 

Try to change another wall socket to plug it and ensure that the powerline light is yellor or green; then please test the speed.

 

You can follow the below instruction to narrow down the issue and tell us some details:

https://www.tp-link.com/support/faq/2231/

a. The speed you can get from 8030P directly. Try to remove the AV600 and use the AV1300 only and test the speed you can get.

b. The wired/wireless link speed of your computer; how to get it: https://www.tp-link.com/support/faq/2265/

c. The powerline link rate between the powerline adapters which shows up on the tpPLC utility.

 

Any updates, just let us know.


Good day.

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 369

Replies: 1