Home Network Community > Powerline Adapters > Do router channels need to match Powerline channels?
< Powerline Adapters

Do router channels need to match Powerline channels?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Do router channels need to match Powerline channels?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Do router channels need to match Powerline channels?
Do router channels need to match Powerline channels?
2020-01-03 22:03:17 - last edited 2020-01-10 07:29:37
Model: TL-WPA8630P KIT  
Hardware Version: V2
Firmware Version:

Hi folks,

My router (a Vodafone one) is broadcasting the 2.4GHz on Channel 11 (auto) and the 5GHz on Channel 100 (auto), but I notice that my Powerline extender is using ‘Auto (Current channel 2)’ and ‘Auto (current channel 36). My WiFi performance isn’t great and I’m wondering about changing the channels. Should I fix them on the router and then fix them to the same ones on the Powerline, fix them on the router but leave the Powerline as ‘Auto’, or something else?

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:Do router channels need to match Powerline channels?-Solution
2020-01-07 07:14:34 - last edited 2020-01-10 07:29:37

@BananaRacer 

 

Hello, you can adjust the wireless settings as the instruction below.

https://www.tp-link.com/support/faq/1418/

 

The powerline adapters do not have to match the router's channel; while they can be the same; Considering the current wifi performance of TL-WPA8630PKIT is not good enough, you can customize the wifi settings to give it a go. You can use different channel and channel width to test its performance and choose the best one.

 

May it help. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:Do router channels need to match Powerline channels?-Solution
2020-01-09 08:07:09 - last edited 2020-01-10 07:29:37
The performance of the powerline kit is fine; it is the Vodafone router that was poor. I have manually set the Vodafone router channels and left the Powerline channels on auto and all seems good.
Recommended Solution
  0  
  0  
#3
Options
3 Reply
Re:Do router channels need to match Powerline channels?-Solution
2020-01-07 07:14:34 - last edited 2020-01-10 07:29:37

@BananaRacer 

 

Hello, you can adjust the wireless settings as the instruction below.

https://www.tp-link.com/support/faq/1418/

 

The powerline adapters do not have to match the router's channel; while they can be the same; Considering the current wifi performance of TL-WPA8630PKIT is not good enough, you can customize the wifi settings to give it a go. You can use different channel and channel width to test its performance and choose the best one.

 

May it help. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:Do router channels need to match Powerline channels?-Solution
2020-01-09 08:07:09 - last edited 2020-01-10 07:29:37
The performance of the powerline kit is fine; it is the Vodafone router that was poor. I have manually set the Vodafone router channels and left the Powerline channels on auto and all seems good.
Recommended Solution
  0  
  0  
#3
Options
Re:Do router channels need to match Powerline channels?
2020-01-10 07:29:11

@BananaRacer 

 

Gotcha, thanks for your updates. 

 

Now you can use the internet with the powerline adapters. 

 

If need more help, be free to let me know.

 

Good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 3479

Replies: 3

Related Articles
Channel frequencies
412 0
 manual channel dfs channels
193 1
 Need to set channel on my router for Sonos
916 0
Need to change the channel in Archer VR600
1613 0
Need to be able to manually set my Channel
79 0
 Need for channel adjustment
375 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.