error code 9003
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.error code 9003
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Im having this error code 9003 once i enter the Network-> lan settings
I didnt see this when previuisly
and now this makes me crazy as i cant see the static ip rules i have and i cand add new once !
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Guys, maybe you have a Broadlink RM3 mini device?
Look at this:
https://community.tp-link.com/en/home/forum/topic/110930
- Copy Link
- Report Inappropriate Content
TL:DR: I sucessfully removed the error 9003.
I have been trying to solve this issues for many months and I'm so happy that I found this thread. When I contacted TP-Link support they were completely unhelpful and had no idea what this error code was. They suggested I return/replace my device.
I have an Archer VR400 router and I can confirm that the error 9003 is related to having a Broadlink RM Mini3 device that is connected to the network. I don't know why, but removing this device has cleared the error.
To remove the 9003 error code:
- Disconnect the Broadlink RM Mini3 from the power (shut it off)
- Reboot the router
- Log back into the router settings - no more error.
Link to another thread with multiple users indicating that the Broadlink RM Mini3 was causing issues.
Thanks to @epyblast for suggesting this solution!
- Copy Link
- Report Inappropriate Content
Hello, may I know can you see this error code in other pages?
Try to use different web browsers or devices to access the web UI.
And you can reboot the router to give it a go.
If still the same, please hard reset it by holding the reset hole for 10s with the router powered on.
Good day.
- Copy Link
- Report Inappropriate Content
I did try to reboot & with different web browsers from different computers/laptops - nothing works
regarding hard reset, then i will lose all my configurations right ?
I don't want to loose, is there is a way to save them and apply it after hard reset ?
- Copy Link
- Report Inappropriate Content
@OmarD Just wondering if you were able to resolve this.
I'm having an Error Code 9003 on a new Archer VR500v as well. I requested a replacement but it did not resolve the issue. I basically disconnected everything except 1 laptop via ethernet then rebooted the modem - the error disappear but as soon as I add other devices the Error Code 9003 returns.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Guys, maybe you have a Broadlink RM3 mini device?
Look at this:
https://community.tp-link.com/en/home/forum/topic/110930
- Copy Link
- Report Inappropriate Content
epyblast wrote
Guys, maybe you have a Broadlink RM3 mini device?
Look at this:
https://community.tp-link.com/en/home/forum/topic/110930
Yes. As a matter of fact, I do. I will disconnect it and observe. Thank you for coming back to this thread.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@OmarD Maybe something related to the name of the device? When the name will be showed in a config page of the router, the error 9003 appears. Disconnect the device, reboot your router, and try again. Error code is gone!
- Copy Link
- Report Inappropriate Content
@epyblast - Yes. This device is definitely what's causing the Error 9003. I've powered off the device and rebooted the modem and the error is no longer happening. Darn, good thing I resisted buying a second Broadlink device.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 6
Views: 15549
Replies: 13
Voters 1
