Issue: TL-PA8010P V1 and V2 devices, togheter, in the same network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Issue: TL-PA8010P V1 and V2 devices, togheter, in the same network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Issue: TL-PA8010P V1 and V2 devices, togheter, in the same network
Issue: TL-PA8010P V1 and V2 devices, togheter, in the same network
2020-01-30 13:35:48
Model: TL-PA8010P KIT  
Hardware Version: V2
Firmware Version: TL-PA8010P(EU)_V2_170511

Hello,
since very recently, i try to run, TL-PA8010P V1 and V2 devices, togheter, in the same network, but i face a) lower trafic via V2 adapter (aprox. 50% lower the on V1 adapter) and the V2 adapter  goes regularly into error mode (red led on; loos network connections). 
I also saw that the newest awailable V1 update is from 2018 and for V2 from 2017.

Any hep is very welcome. 

  0      
  0      
#1
Options
1 Reply
Re:Issue: TL-PA8010P V1 and V2 devices, togheter, in the same network
2020-02-02 09:49:08 - last edited 2020-02-02 09:49:32

@Jokr 

 

Hello, how do you verify the low traffic issue of two adapters the V2 adapter? What is the actual speed you can get from the two adapters respectively?

 

Have you ever tried to swap the location of the two adapters to rule out the effect of the powerline environment?

 

Besides, you can change another wall socket to plug the V2 adapter.

 

May it help.

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 664

Replies: 1