How to turn off DHCP in re200 V3 access point mode?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I need to turn off the dhcp in Re200 V3 in access point mode. How do i do that?
Thx yair
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
TP-Link wrote
RE205 v3: https://static.tp-link.com/2020/202010/20201022/RE205v3_20201020.zip u very much!
@TP-Link Is there one for the RE205 v2 as well so I can test that out? (As I previously reported, same bug on the V2.)
- Copy Link
- Report Inappropriate Content
@TP-Link 305v3
Actually I have few problems with the beta firmware, can I install the latest stable one or do I risk the brick my device?
- Copy Link
- Report Inappropriate Content
@TP-Link Hye is it compatible for Malaysia ?
TP-Link wrote
Hello,
Sorry for the delay.
there is the related firmware:
RE205 v3: https://static.tp-link.com/2020/202010/20201022/RE205v3_20201020.zip
Re300 v1: https://static.tp-link.com/2020/202011/20201110/RE300_V1_201110.zip
Re305 v3: https://static.tp-link.com/2020/202011/20201119/RE305_v3_201114.zip
Re200 v4: https://static.tp-link.com/2020/202006/20200612/re200v4_eu-up-ver1-0-6-P1[20200608-rel40529].zip
RE200 V3: https://static.tp-link.com/2020/202010/20201029/re200v3_eu-up-ver1-1-1-P1[20191127-rel47933].zip
How to update the firmware: https://www.tp-link.com/support/faq/1406/
Please note: the official firmware would be released later.
Please feel free to update here with further improvement.
Thank you very much!
- Copy Link
- Report Inappropriate Content
Hi, it is ok to update the latest firmware from beta firmware;
And just curious, what problems do you have on the beta firmware?
@Lola92 Hi, the beta firmware is ok for Malaysia as well.
Thank you very much.
- Copy Link
- Report Inappropriate Content
@TP-Link Hey, actually I've expirienced this problem on the stable firmware too. The problem is that the range extender losts the connection with the main router, in order to solve the problem I've to unpglug and plug it back in the power supply.
I've fixed this issue turning off the high speed feature.
- Copy Link
- Report Inappropriate Content
@TP-Link is there a beta firmware available for the RE205 v2?
TP-Link wrote
Hello,
Sorry for the delay.
there is the related firmware:
RE205 v3: https://static.tp-link.com/2020/202010/20201022/RE205v3_20201020.zip
Re300 v1: https://static.tp-link.com/2020/202011/20201110/RE300_V1_201110.zip
Re305 v3: https://static.tp-link.com/2020/202011/20201119/RE305_v3_201114.zip
Re200 v4: https://static.tp-link.com/2020/202006/20200612/re200v4_eu-up-ver1-0-6-P1[20200608-rel40529].zip
RE200 V3: https://static.tp-link.com/2020/202010/20201029/re200v3_eu-up-ver1-1-1-P1[20191127-rel47933].zip
How to update the firmware: https://www.tp-link.com/support/faq/1406/
Please note: the official firmware would be released later.
Please feel free to update here with further improvement.
Thank you very much!
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, Sorry for the delay.
This is the first time that we had this feedback and could you please help me check the following details:
1. What is the original firmware before you upgrade the RE305 v3?
2. Can I have a picture of the bottom label on the RE305?
3. Is there any power outage or any abnormal behavior during the firmware update?
4.By the way, how long have you had the RE305?
Thanks a lot for your understanding and support.
Wait for your reply.
- Copy Link
- Report Inappropriate Content
1. What is the original firmware before you upgrade the RE305 v3?
If i remember correctly was 1.1.2
2. Can I have a picture of the bottom label on the RE305?
3. Is there any power outage or any abnormal behavior during the firmware update?
No, Usual message that device is restarting. i waited for 40-50 minutes before i try anything (e.g. turn it off and on, reset)
4.By the way, how long have you had the RE305?
Its still on warranty (bought it 5/2020) but it will take few weeks for replacement ..if i manage to get it to service due to lockdown here in Greece
- Copy Link
- Report Inappropriate Content
Thank you very much for your kind reply.
After checking with the senior engineers, I am afraid that there is no other suggestion yet.
As for the beta firmware, we have confirmed that there is no obvious issue since we tested on our side and also with some customers, all proved fine.
And you might need to wait for the replacement.
Really sorry for the inconvenience.
Thanks a lot for your understanding and support.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 21417
Replies: 45
Voters 2
