Error code: 4813 This number should be between 0 and 1000.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Error code: 4813 This number should be between 0 and 1000.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Error code: 4813 This number should be between 0 and 1000.
Error code: 4813 This number should be between 0 and 1000.
2020-02-13 11:27:33 - last edited 2020-02-14 03:21:25
Model: Archer A2300  
Hardware Version: V2
Firmware Version:

ARCHER VR600

i get this error when i try changing upload or download bandwith speed as kbps, also whenever i try as mbps and typing 4, 4 mbps is throttling my speed to 3 mbps

https://prnt.sc/r1q9cu

File:
vvvq.pngDownload
  0      
  0      
#1
Options
6 Reply
Re:Error code: 4813 This number should be between 0 and 1000.
2020-02-14 04:01:19

@dennisx 

 

Hello, it is normal, actually it is designed so.

 

To make calculation easier, we usually regard 1000Kbps as 1Mbps. And once the bandwidth is larger than 1000Kbps, we use Mbps; the Kbps is mainly used for those who have the upload bandwidth lower than 1000Kbps(1Mbps).

 

And with QoS enabled, which makes your devices get speed as the actual needs respectively, the CPU will handle the data packets, which will affect the maximum speed to can get.

 

May it help.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Error code: 4813 This number should be between 0 and 1000.
2020-05-23 14:01:13 - last edited 2020-05-23 14:02:00

@Kevin_Z 

 

I have this error message too, but my problem is how to set upload to 1200Kbps. You can't put in 1.2Mbps, and clearly the difference between 1 and 2 Mbps is significant when you're taking a percentage of it.

 

Seems like really poor design.

 

regards

Dave

  0  
  0  
#3
Options
Re:Error code: 4813 This number should be between 0 and 1000.
2022-02-03 12:49:29

@dave1998 Hi Dave, 

 

Did you ever find a fix for setting a 1.2mbps speed? 
 

Thank You

  0  
  0  
#4
Options
Re:Error code: 4813 This number should be between 0 and 1000.
2022-02-03 22:00:19
Hi, even if the implementation method may seem strange and unorthodox, it actually works as Kevin explained, for the majority of users who have speeds below 1000Kbps which is the majority. However, forcing the BitRate down is also obvious that it will give you an error, but it warns you with a PopUp message that the speed cannot be lower than the real one. Why don't you keep 1000Kbps by default so that you have all the available bandwidth? isn't it a simpler method than complicating your life with senseless methods?
  0  
  0  
#5
Options
Re:Error code: 4813 This number should be between 0 and 1000.
2022-02-05 14:41:13

@AlexArchive 

AlexArchive wrote

@dave1998 Hi Dave, 

 

Did you ever find a fix for setting a 1.2mbps speed? 
 

Thank You

 

No!

  0  
  0  
#6
Options
Re:Error code: 4813 This number should be between 0 and 1000.
2022-02-05 14:42:42

@PasKy 

 

Thanks for your reply.

 

I'm glad it works for the majority of users. Imagine if all software was made that way...

  0  
  0  
#7
Options